Engine Oils

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Keeps engine extremely clean by minimizing deposits. Provides ultimate protection against wear under all operating conditions
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition

• Approved: Volvo 95200377 Meets: ACEA A5/B5, ACEA A1/B1, API: SL

• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced soot control to prevent premature oil degradation
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C3, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade
• Low Speed pre-ignition protection incorporated

• Meets: ACEA: C5
• API: SN, SP

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy*
• Delivers more horsepower and greater acceleration*
• Stronger under pressure in today’s modern engines
• Suitable for use in hybrid cars

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

• Fuel saving technology
• Compatibility with after treatment systems
• Fully synthetic, long drain formulation
• Very high standards of engine cleanliness

• ACEA C2
• BMW LONGLIFE-12 FE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy*
• Delivers more horsepower and greater acceleration*
• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy*
• Delivers more horsepower and greater acceleration*
• Stronger under pressure in today’s modern engines
• Suitable for use in hybrid cars

• ACEA C3, API SN PLUS
• BMW Longlife-04, MB-Approval 229.31/ 229.51/ 229.52

Carlube Triple R 0W-20 R-Tec 6 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 0W-20 R-Tec 6 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles. They provide exceptional fuel economy particularly in 0W-16 as well as 0W-20 vehicles.
They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

Carlube Triple R 10W-60 R-Tec 33 is a technically advanced fully synthetic engine oil designed for the latest generation of high-performance engines, to provide advanced levels of wear protection and performance compared to conventional oils.

It provides excellent engine performance under all driving conditions, excellent cold-weather starting and rapid circulation, and lower oil consumption due to synthetic base.
Lower oil consumption due to synthetic base stocks Excellent cold-weather starting and rapid circulation

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Provides ultimate protection against wear under all operating conditions

• Approved: GM dexos1 Gen 2 D10834IE103 Meets: API: SN, ILSAC GF-5
• API Resource Conserving

Carlube Triple R 0W-20 R-Tec 2 is suitable for the latest fuel-efficient cars meeting Euro 6 where 0W-20 SAE grade is recommended.

It keeps hot running engine components clean including the prevention of deposit in Turbochargers.
The SAPS level ensures after-treatment operation over its lifetime including engines equipped with Gasoline Particulate Filters.
Carlube Triple R 0W-20 R-Tec 2 also provides multiple 0W-20 OEM specifications on one oil. This reduces complexity and the need to stock several oils.
The product delivers a high fuel economy in the latest OEM specifications. Delivers cleanliness and turbocharger protection in highly loaded engines

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test

• Approved: BMW LL-04, MB 229.51, Porsche C30, VW Standard 504.00/507.00*. Meets: ACEA C3
• MB 229.31

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Designed for engines running on bio fuel mixtures (for example E85)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition

• Meets: ACEA C5, API: SN
• Jaguar Land Rover STJLR.03.5004, Ford WSS-M2C948-B (petrol engines), Backwards compatible with Ford WSS-M2C913-B, C and WSS-M2C925-B.Please refer to the product information sheet for specific Ford recommendation.

• Excellent fuel efficiency
• Ensures consistent lubricant performance over extended drain intervals
• Zero compromise in engine protection
• Exceptional low temperature performance

• ACEA C5, API SN, JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

Technical Information

Leistungsstarkes Motoröl auf Basis ausgewählter Mineralöle. Sorgt für optimale Leistung und Schutz des Motors unter allen Betriebsbedingungen. Sichere Schmierung, optimale Geräuschdämpfung sowie geringer Verschleiß sind ebenso selbstverständlich wie sanftes Ein- und Auskuppeln sowie Schalten. Kat-getestet.

Technical Information

Heavy-duty motor oil based on selected mineral oils. Ensures optimum performance and protection of the engine under all operating conditions. Reliable lubrication, optimum noise damping and low wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters.

• Excellent fuel efficiency
• Ensures consistent lubricant performance over extended drain intervals
• Zero compromise in engine protection
• Exceptional low temperature performance

• ACEA C5, API SN
• JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol MAGNATEC 0W-30 D is suitable for use in vehicles that require a 0W-30 lubricant that Meets Ford WSSM2C950-A specification.

Product Performance Claims

• ACEA C2
• Meets Ford WSS-M2C950-A

• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA C2
• Meets Ford WSS-M2C950-A

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test

• Approved: BMW LL-04, MB 229.51, Porsche A40, VW Standard 502.00/505.00/505.01, GM dexos2 GB2E0310103, Renault RN0700/0710 Meets: ACEA C3, API: SM, SN/CF
• Ford WSS-M2C917-A. Recommended for use where Fiat 9.55535.S2 is specified.

Carlube Triple R 0W-16 R-Tec 1 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 0W-16 R-Tec 1 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and have proven real-world performance in conventional and hybrid vehicles.
They provide exceptional fuel economy, particularly in 0W-16 & 0W-20 vehicles.
They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

Carlube 2-Stroke Endurance Oil has been developed to satisfy and meet the requirements of water-cooled outboard marine 2-stroke engines for both leaded and unleaded petrol engines. The high resistance to water wash-off and corrosion protection makes it an ideal choice for boats, trailer wheel bearings, swivel hinges, pins, propeller shafts, cables and pulleys, winches and other routine marine maintenance.

High resistance to water wash-off. Corrosion protection. Excellent protection against piston scuffing and seizure. Ashless detergent, dispersant additives reduce engine deposits and ring sticking. Strong anti-gel performance. Excellent rust protection.

• Fuel economy formulation with no compromise in protection
• Designed specifically for the latest Volvo engines
• Exceptional long-term additive response
• Outstanding cold-start fluidity

• ACEA C5, API SN, VOLVO VCC RBS0-2AE

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and GPF (Gasoline Particulate Filter)
• Keeps engine extremely clean by minimizing deposits
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Provides ultimate protection against wear under all operating conditions
• Protects GDI (Gasoline Direct Injection) engine from Low-Speed Pre-Ignitions (LSPI)

• Approved: GM dexos1 Gen 2 D10834IE103
• Meets: API: SP, SN Plus RC (Resource Conserving)
• Ford WSS-M2C962-1A
• ILSAC GF-6, GF-6

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test

• Approved: BMW LL-01, MB-Approval 229.5, VW Standard 502.00, 505.00 Meets: ACEA A3/B4, API: SL/CF
• MB 229.3, GM LL-A-025 and LL-B-025. Recommended for use where Fiat 9.55535.G1 is specified.

• Fuel economy formulation with no compromise in protection
• Designed specifically for the latest Volvo engines
• Exceptional long-term additive response
• Outstanding cold-start fluidity

• ACEA C5, API SN
• VOLVO VCC RBS0-2AE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Drivers and mechanics have trusted Castrol GTX for over 50 years to help extend engine life. Castrol GTX's 3X-Clean formula has been developed to fight the three main causes of engine sludge: heat, contaminants and short trips. By cleaning away existing sludge and creating a barrier that helps stop deposits from forming, Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards. This means drivers and their vehicles enjoy more years together. Castrol GTX: helps extend engine life

Application

Castrol GTX 5W-30 RN17 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3 5W-30 lubricant. Castrol GTX 5W-30 RN17 is approved for use in vehicles that require a Renault RN17 specification 5W-30 lubricant.

Advantages

• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Provides advanced protection against viscosity and thermal breakdown.
• Demonstrates exceptional protection against high temperature deposits
• Contains premium synthetic technology base oils and anti-wear additives

Performance

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

• Castrol GTX: helps extend engine life
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Provides advanced protection against viscosity and thermal breakdown
• Demonstrates exceptional protection against high temperature deposits
• Contains premium synthetic technology base oils and anti-wear additives
• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

• Provides protection for diesel particulate filters and catalytic converters
• Designed specifically for the latest Ford diesel engines
• Exceptional long term additive response
• Combines high performance with fuel efficiency

• ACEA C2
• FORD WSS-M2C950-A, JAGUAR LAND ROVER STJLR.03.5007

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test

• Approved: PSA B71 2290-2017 Meets: ACEA C2, A1/B1, A5/B5, API: SM, SN/CF
• Renault RN0700. Meets requirements of: Honda*, Toyota*. Recommended for use where Fiat 9.55535.S1 is specified. *Check owners’manual before use

• Designed specifically for modern Nissan & Renault diesel vehicles
• Provides protection for diesel particulate filters and catalytic converters
• Provides high performance with fuel efficiency
• Backwards compatible to older Renault models

• ACEA C3, C4, RENAULT RN0720, MB 226.51, 229.51

• Outstanding thermal properties
• Compatible with after-treatment systems
• Excellent anti-wear characteristics
• Prevention of sludge and varnish formation

• ACEA C3, RENAULT RN17