Workshop Tools

• Manufactured from hardened and tempered Chrome vanadium steel.
• Suitable for electricians(1000V AC safe live working).
• Each spanner is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Packed in blow case and EVA foam
• Open-End Spanners – 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 17 mm & 19 mm

• A tyre inflator for the professional garage. Calibrated from 2-150PSI in 1 lb units (15-1040kPa in 1 kPa units).
• Garage tyre inflator
• Twin head with bleed valve
• Features air release valve/300mm hose
• Soft grip
• Head manufactured from chrome plated steel

• Tough re-usable waterproof cover with a laminate woven polyethylene construction
• Heat sealed, poly rope reinforced hem
• Highly durable, tear, stretch and UV resistant, with rust resistant metal eyelets
• Twin colour is reversible between silver and green and weighs 80 grams per square metre
• Size: 5.4 x 5.4m (18 x 18ft)

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• NCCJ25F-FW - Front Wheel Replacement
• NCCJ25F-H - Handle Replacement
• NCCJ25F-P - Hydraulic Pump Replacement
• NCCJ25F-RP - Rubber Pad Replacement
• NCCJ25F-RW - Rear Wheel Replacement

• NCCJ30LPF-FP - Foot Pedal Replacement
• NCCJ30LPF-FW - Front Wheel Replacment
• NCCJ30LPF-H - Handle Replacement
• NCCJ30LPF-P - Hydraulic Pump Replacement
• NCCJ30LPF-RP - Rubber Pad Replacement
• NCCJ30LPF-RW - Rear Wheel Replacement

• Precision balanced design and steel shot-filled head for optimised control.
• Durable metal faces preventing chipping on contact.
• Steel reinforced handle for higher durability.
• Over molded handle for more control and better grip.

• Suitable for any petrol engined vehicle with 12V ignition system including electronic types
• Indicates ignition timing, inductive pick-up and powered by vehicles own battery
• The Xenon timing light allows the dynamic ignition timing to be set
• The special Xenon bulb provides the ultrabrite flash needed to see engine timing marks under normal daylight or bright workshop conditions

• Built in brush
• Leak protection in liner
• Volume 60ml
• Height 76mm diameter 40mm
• Ideal for body shop use
• Pack of 100

• Versatile Open End Wrench Designed For Use In Hard-To-Reach Areas
• Features Mirror Polish Chrome Plated Finish For Rust Resistance
• Includes storage rail for convenient storage.

• Carlyle SAE Combination End Crows Foot Set (10 Pieces)

• Integrated welded frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops
• Individual cell monitoring ensures optimal charge and discharge for maximum life
• Discharge protection prevents cell damage from over-discharge
• Delivers up to 3x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous MILWAUKEE® battery technology (Results depend on tool and application)
• REDLITHIUM™ protection with REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations
• Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• For the safe and easy removal of oil
• Made from composite plastic
• For suction and supply of gear oils etc.
• Syringe hose length 410mm

• Industry approved ‘Viton’ seals for water based h.d. chemicals in a trade environment
• Ideal for professionals such as cleaning companies and car washes but also perfect for use around the house
• Great for cleaning windows, bathroom surfaces and fixtures, furniture and upholstery, vehicle windshields and windows
• Comes with full spares support

• M12™ LED electronics deliver 2x longer run time on a single charge with less heat
• Magnetic back for hands-free use
• The 120 lumen LED light is 2x brighter and whiter than conventional incandescent bulbs
• Sealed aluminium head is designed for impact- and weather-resistant durability
• 90° rotating head allows the user to easily direct the light beam at the desired work area
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• NCCJ30F-FW - Front Wheel Replacement
• NCCJ30F-H - Handle Replacement
• NCCJ30F-P - Hydraulic Pump Replacement
• NCCJ30F-RP - Rubber Pad Replacement
• NCCJ30F-RW - Rear Wheel Replacement

General Information

Coil Spring Compressor.;,**, Coil Spring Compressor;,..

• An essential service tool
• Maximum extension 235mm
• Safe working pressure 1000kg
• Supplied with safety hooks
• Always grease threaded bars

• Mild steel welding wire for welding low and medium tensile steels
• SG2 A18 ER70S-6

General Information

Stud Extractor Set - 1-6mm/6-12mm 2pc Stud Extractor Set - 1-6mm/6-12mm 2pc.

• Impact quality in 3/8in. drive and 1/4in. drive
• Robust impact quality
• Manufactured from Chrome Molybdenum
• 1/4in.D extractor operates on studs from 1-6mm (Spare jaws - Part No 0888)

General Information

Digital Vernier Caliper 150mm/6". Digital Vernier Caliper 150mm/6"

• Manufactured from hardened and tempered stainless steel with large LCD display
• With Metric/Imperial option, zero setting, on/off switch, locking screw plus internal and external measuring jaws
• Presented in blue plastic storage case

• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Not for use on or near live electrical circuits.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• 25mm Valve Protrusion
• Length 33.0mm without cap
• TR412
• Box Qty: 100

• Forged from high quality chrome molybdenum alloy steel
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Phosphate

• Socket set features mirror polish Chrome-Plated finish for rust resistance
• 6 Points
• Shallow Metric Socket Set

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Hardened magnetic tips for maximum durability and fastener retention
• Wrench ready shank allows extra leverage to be applied
• Anti-roll, 3 sided collar on the handle
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications

• Precision balanced design and steel shot-filled head for optimised control.
• Durable metal faces preventing chipping on contact.
• Steel reinforced handle for higher durability.
• Over molded handle for more control and better grip.