Workshop Tools

• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting
• Thanks to its compact design it operates in locations other lights cannot
• TRUEVIEW™ high definition lighting
• Pivoting 45° forward & backward head allows for 180° coverage
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Protected against splashing water at all angles (IP24)

• According to DIN 335C / 90° angle.
• Cutting edges: 3
• Deburring and countersinking in one go according to DIN74/75.
• Cutting geometry optimised for easy centering, good chip removal and low vibrations.
• Up to 50% longer lifetime vs. standard HSS countersinks. Requires less feedforce.
• Best lifetime is achieved when used with lubricant.
• Suitable for steel and stainless steel < 1100 N/mm², cast iron, aluminium and plastics.

• 90 tooth design with 4 °of arc swing for tight work spaces.
• Comes with a removable inner tray perfectly designed to be stored.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• All metal design for maximum durabilty.
• FOUR FLAT™ sides on socket deter rolling.
• Slim profile head with flush direction lever offers better accessibility.

General Information

Manual Pressure Brake Bleeder 2L

• Manual brake bleeder
• Easy to use and designed for single handed operation
• 2 litre container supplied with European adaptor
• Is supplied along with a European adaptor
• Designed to use with most brake master cylinder reservoirs measuring 1in. to 3in.

• Metal reinforced corners.
• IP65 rated weather seal to keep out rain and jobsite debris.
• Interior organiser trays.
• Mounting location for the ONE-KEY™ TICK ™.
• Part of the PACKOUT™ modular storage system.
• Metal reinforced top handle for easier carrying (only on the large box).
• Constructed with impact resistant polymers for jobsite durability.
• Metal reinforced locking point.

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Supplied in metal storage case with instructions and application list
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Features a non-slip ratchet end and non-slip open end.
• Full polish chrome finish on each wrench resists corrosion while maintaining the look and feel of a new product.
• This design provides an incredibly precise turning radius for work in tight spaces.
• The 90 tooth count gear allows 4 degree arc swing.

• Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces)

• VDE (DIN EN/IEC 60900) certified tools. Tested to 10,000 volts and guaranteed to 1,000 volts. Tested against cold to -40°.
• Steel blades are fully forged, hardened and tempered for best durability. Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• Induction hardened cutting edges to cut even the hardest of materials.
• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.
• Ergonomic grip with softgrip for comfortable handling and good grip.

• According to DIN 8033.
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Includes: Types B ,C ,D, H, M.
• Type C: Cylindrical ball nose for top and side cutting.
• Type D: Ball for milling holes and creating concave cuts.
• Type H: Flame for contouring.
• Type M: Cone for angled edges and narrow contours.

• Features a patented low-rattle design
• laser-etched size indexing
• 60% thicker ergonomic handle design
• 25% wider jaws providing the ability to work on larger fasteners
• Wrench can be used in extremely tight situations where other wrenches would fail

General Information

Diesel Injector Remover - VAG TDi

• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Equivalent to: OEM T10402, T10415
• Use in accordance with OEM instructions
• No solenoid removal required

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Forged from high quality chrome molybdenum alloy steel
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Phosphate

• Pneumatic tool that utilises existing airline systems in garages
• Manufactured using a high quality resin based plastic giving it a robust but lightweight design – ideal for everyday garage life
• Suitable for use with the full range of NAPA CV boots as well as other branded ‘stretchy’ boots
• The piston design allows the boot to be expanded and then disconnected from the airline – no need to drag it round the garage
• The boot remains fully expanded until the release is pressed
• Reduces fitting time to approximately 20 minutes
• One model that covers all vehicle models
• Working pressure 4 to 8 bar
• Supplied ready assembled
• Features a patented built in safety mechanism and is fully CE Certified
• The Machinery Directive 2006/42/EC
• BS EN ISO 12100:2010 Safety of machinery
• BS EN ISO 4414:2010 Pneumatic fluid power

• 90 tooth design with 4Dg of arc swing for tight work spaces.
• FOUR FLAT sides on socket deter rolling.
• All metal design for maximum durabilty.
• Standard sockets: 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm
• Deep well sockets: 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm
• 76 mm extension, 152 mm extension, universal joint

• Full Polish Chrome
• 6 Piece
• 6 Point
• Non- Slip Ends
• 90 Tooth Count
• 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18 & 17 x 19 mm
• Features a non-slip ratchet.

• The 90 tooth count gear allows 4 degree arc swing

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

General Information

Diesel Injector Seat Cleaner Set 14pc Diesel Injector Seat Cleaner Set 14pc.

• For cleaning diesel injector seats prior to fitting new injectors
• Contents include: 2 x Silicone Nylon brushes 15mm and 20mm
• 3 x Brass coated Steel wire brushes 18mm, 22mm, 25mm as well as 1 x Steel wire injector nozzle port cleaner
• 224mm long bit driver with quick chuck, 6 x port sealing plugs plus insertion rod
• Packed in a blow mould case

• THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.

• Deep-reach cross handles for increased reach in tight spaces for best access.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Single-joint grip force for more control and better grip compared to double joint.
• Rounded tips to grab hoses without damaging these.

• Kit Contenst: 4932492500, 4932492501, 4932492502

• Slim head dimensions for access in tight areas.
• Rounded I-beam handle for comfortably applying torque.
• Ink-filled size labels for easy and quick size identification.
• Chrome finish for corrosion and rust resistance.
• Sets come in a durable pouch.

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Engine Timing Tool Kit - GM engines.;, Engine Timing Tool Kit - GM engines;,..

• Engine timing tool kit for GM engines fitted to Vauxhall/Opel and other vehicles 16v 1.6 and 1.8
• Applications: Astra-G, Corsa-D, Insignia, Mervia, Signum, Vectra-C & Zafira-B 2003-2011
• Also fits Chevrolet Cruze, Orlando 1.4, 1.6, 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines
• Instructions included

• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2016

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 2.7 m / 9ft Tyre Valve Connection: Twin clip-on Calibration: 0-138 psi / 0-9.6 bar

General Information

Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol.

• Applications: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo
• Engine codes: 1.0lt LE1/B10XFL,B10XFT, B10XHT AND 1.4LT LV7/B14XE, LE2/B14XHL, B14XHT
• Equivalent to OEM EN-51367, EN-51298, EN-51632
• Year 2014-2017
• Made in Sheffield

General Information

Crankshaft Locking Kit - Ford 2.2. Crankshaft Locking Kit - Ford 2.2

• TDCI crankshaft locking kit
• Ford Transit 2.2 2006<
• Used to lock and time the crankshaft and flywheel to allow the TDC sensor position to be set after removal when servicing the cam chain drive system
• Applications: Econetic and HDT engines