Workshop Tools

• Ergonomic handle for maximum grip
• A durable high power, high temperature (up to 1500 C) gas torch
• Instantly FLARESAFE; use at any angle
• Swirl flame for more even heat distribution, wrapping around the target
• Auto start Piezo ignition
• Ideal for plumbing, brazing and automotive
• Safety checked and test burned
• Fitted with CGA600 connection
• For use with G2400 Go System propane gas cylinder
• Gas cartridge sold separately

• Conforms to BS:EN521

• Steel shot-filled head for increased rebound reduction and maximised impact.
• High-performance cover preventing damage to surfaces.
• Precision balanced design and over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.

• 433mhz sensor
• Programmable Sensor
• Fits most UK & European Vehicles

• 433mhz sensor
• Programmable Sensor
• Fits most UK & European Vehicles

• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.
• 25 mm blade height for improved stability and minimum vibration.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Deep-reach cross handles for increased reach in tight spaces for best access.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Single-joint grip force for more control and better grip compared to double joint.
• Textured nose maintains control when grabbing and twisting with serrated nose.

General Information

Brake Fluid Tester

• Identify percentage of water in brake fluid
• Essential safety check
• Quick and simple tool
• Colour coded LEDs show level of water
• Battery supplied
• Suitable for DOT 3, DOT 4 & DOT 5.1
• PLEASE NOTE - NOT SUITABLE FOR SILICONE BASED DOT 5 FLUID

• Socket set features mirror polish Chrome-Plated finish for rust resistance
• Radius cornered 6-Point Socket design offers better fastener control
• Shallow Metric Socket Set

• Socket set features mirror polish Chrome-Plated finish for rust resistance
• 6 Points
• Deep Metric Socket Set

• Single stage two gauge
• Gas regulator

• SHOCKSHIELD grip reduces peak vibration.
• Precise balance for better handling and control.
• I-Beam handle construction resists bending.
• Strong steel head prevents chipping on contact.
• Durable grip handle with an anti-slip design.

• 127mm Groove Joint Pliers
• 250mm Groove Joint Pliers
• 300mm Groove Joint Pliers

• Hardened jaws: Better grip force on jobsite material.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round materials for welding. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Lever release design: Traditional release lever for jobsite convenience.
• Rust protection: Chrome plated tool increases life by reducing corrosion.

• 90 tooth design with 4 °of arc swing for tight work spaces.
• Slim profile head with flush direction lever offers better accessibility.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Excellent abrasion resistance
• Good flexibility and kink resistant
• Resistance to oil and fuels
• Silicone free
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Working Pressure (1): 300 psi / 21 bar
• Burst Pressure: 63 bar (3:1 safety factor)
• Temperature Range: -10°C to 60°C

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

• General purpose tyre inflator with an all Alloy body with a rubber protected gauge
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• Simple and easy to use, ideal for general low volume tyre inflation

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Extends the length of spanners when you need more leverage
• Length 385mm
• Universal use
• Manufactured from Chrome Vanadium with high Chromed finish
• Gloves and goggles should be used in high powered situations

• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Hardened magnetic tips for maximum durability and fastener retention.
• Anti role, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied.

General Information

Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm

• Adjusts from 51mm to 260mm
• Cleans and de glazes cylinders of carbon deposits quickly and effectively
• Flexible self-aligning shaft allows use without removing cylinder
• Replacement stone set Laser Part No. 2071 (consumable)
• Use with cordless drill for efficient results

General Information

Thread Repair Kit M10x1.5 Thread Repair Kit M10x1.5.

• Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts
• For repairing and restoring damaged threads
• Spare insert packs available

• M10 x 1.5

• MAX BITE™ open-end grip reduces rounding and stripping.
• Ink-filled labels for better visibility.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Durable double stacked pawls for longer ratchet life.
• Chrome alloy steel, chrome plated.
• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.

• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems
• PVC dipped handles for comfort
• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required

General Information

Brake Drum Wear Gauge. Brake Drum Wear Gauge

• Brake drum wear gauge
• Size range 160mm - 400mm fits a larger range than most similar products on the market
• Selected steel
• Measures drum wear
• Metric and Imperial scale

• 90 tooth design with 4 degreeof arc swing for tight work spaces.
• Versatile lockable flex head: Switch between 7 locking positions and freely moving head.
• Slim profile head with flush direction lever offers better accessibility.
• Standard and extended handle lengths for easier access in tight spaces or extra leverage.

• Deep-reach cross handles for increased reach in tight spaces for best access.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Single-joint grip force for more control and better grip compared to double joint.
• Rounded tips to grab hoses without damaging these.

• Versatile, multi angle head, ideal for confined areas
• A durable high power, high temperature (up to 1630 C) gas torch
• Instantly FLARESAFE; use at any angle
• Swirl flame for more even heat distribution, wrapping around the target
• Auto start Piezo ignition
• Ideal for plumbing, brazing and automotive
• Safety checked and test burned
• Fitted with CGA600 connection
• For use with G2400 Go System propane gas cylinder
• Gas cartridge sold separately

• Conforms to BS:EN521