Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 22 of 34
Results 631 - 660 of 1004
Part number: EMH714
Important compatibility info
| Inner diameter 1 | 14.5 mm |
| Colour | Black |
| Material | Plastic |
| Inner diameter 2 | 14.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 330 mm |
| Function | Hose, crankcase ventilation |
ONLY
£23.61
£23.61
Part number: 0XSS
Important compatibility info
| Title | Hose Clips S/S 0X 18-25mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- 304 grade stainless steel
ONLY
£23.65
£23.65
Part number: 3225-00073
Important compatibility info
ONLY
£23.74
£23.74
Part number: EMH183
Important compatibility info
| Function | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 15.5 mm |
| Inner diameter 2 | 16.5 mm |
| Hose Length | 415 mm |
| Type | Hose, crankcase ventilation |
ONLY
£23.77
£23.77
Part number: MFL1327
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Hose, fuel overflow |
| Function | Hose, fuel overflow |
ONLY
£23.79
£23.79
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£23.85
£23.85
Part number: EMH636
Important compatibility info
| Hose Length | 330 mm |
| Inner diameter 2 | 18.5 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 18.5 mm |
ONLY
£23.97
£23.97
Part number: EMH129
Important compatibility info
| Inner diameter 2 | 10 mm |
| Hose Length | 250 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 10 mm |
| Type | Hose, crankcase ventilation |
ONLY
£24.00
£24.00
Part number: 30847
Important compatibility info
| Title | Hose Clips M/S 70-90mm - Pack of 20 |
Additional Information
- Worm Drive
- Zinc Coated Mild Steel
- DIN 3017
- Qty: 20
ONLY
£24.02
£24.02
Part number: BHC1108
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 63 mm |
| Diameter To | 68 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£24.03
£24.03
Part number: EMH148
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Inner diameter 2 | 5 mm |
| Inner diameter 1 | 8 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 420 mm |
ONLY
£24.04
£24.04
Part number: NB0709
Important compatibility info
| Title | Junior Clips M/S 7-9mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£24.25
£24.25
Part number: AC6103
Important compatibility info
| Title | Airflow Twin Coupling to Standard Adaptor |
Additional Information
Twin Couplings are a quick and easy solution to providing two operation points from a single air line. PCL Twin Couplings are available with either Vertex or Airflow couplings. PCL Airflow couplings are designed for FIXED applications. PCL Vertex couplings are designed for TRAILING HOSE applications.
- Single action
- Steel construction
- Corrosive resistant finish
- Benchmark in the UK for quality and reliability
- Designed for fixed applications
- Thread size: Rp 1/4
- Thread Type: Female
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£24.32
£24.32
Part number: EMH510
Important compatibility info
| Inner diameter 2 | 15 mm |
| Hose Length | 163 mm |
| Inner diameter 1 | 17 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
ONLY
£24.40
£24.40
Part number: MFL1229
Important compatibility info
| Colour | White-transparent |
| Function | Fuel Hose |
| Hose Length | 1000 mm |
| Material | Plastic |
| Type | Fuel Hose |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 6 mm |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
ONLY
£24.42
£24.42
Part number: 179744
Important compatibility info
| Weight | 0.072 kg |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.57
£24.57
Part number: 100453
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Weight | 0.047 kg |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| Extra Description | febi Plus |
| for OE number | 11 15 7 533 346 |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.59
£24.59
Part number: 4168-08019
Important compatibility info
ONLY
£24.59
£24.59
Part number: MFL1230
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Hose Length | 940 mm |
| Inner diameter 1 | 9 mm |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£24.59
£24.59
Part number: 32884
Important compatibility info
| Title | Pipe Connector - T Piece Push-Fit - 12mm - Pack Of 10 |
Additional Information
- Equal Tee
- Plastic
- Metric Sizes
- Natural
- Qty: 10
- 12.0mm ID x L69 x H36
ONLY
£24.72
£24.72
Part number: MFL1195
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£24.79
£24.79
Part number: EMH462
Important compatibility info
| Inner diameter 1 | 21 mm |
| Inner diameter 2 | 20 mm |
| Hose Length | 133 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£25.32
£25.32
Part number: EMH146
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | ACM (Polyacrylate) |
| Inner diameter 2 | 13.5 mm |
| Hose Length | 437 mm |
| Inner diameter 1 | 18.5 mm |
| Type | Hose, crankcase ventilation |
ONLY
£25.35
£25.35
Part number: 6SSP
Important compatibility info
| Title | Hose Clips S/S 6 110-140mm - Box of 5 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- 304 grade stainless steel
ONLY
£25.39
£25.39
Part number: 30840
Important compatibility info
| Title | Hose Clips M/S 23-35mm - Pack of 30 |
Additional Information
- Worm Drive
- Zinc Coated Mild Steel
- DIN 3017
- Qty: 30
ONLY
£25.47
£25.47
Part number: NB1416
Important compatibility info
| Title | Junior Clips M/S 14-16mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£25.48
£25.48
Part number: 108773
Important compatibility info
| Hose Length | 295 mm |
| Weight | 0.064 kg |
| Inner diameter | 16 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£25.58
£25.58
Part number: MFL1298
Important compatibility info
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£25.58
£25.58
Page 22 of 34
Hose & Pipe
