Hose & Pipe

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• 304 grade stainless steel

• Mild Steel
• Zinc Plated
• Mini
• Pack of 20

• Widely used for maintenance and OEM applications
• Mainly used on air, fluid, gas and steam lines as well as being suitable for low pressure hydraulic applications.
• Also referred to as lemon clips, double ear clips and 2-ear clips
• Absence of a screw mechanism allows 'O' clips to be used on extremely small hoses
• Tamper proof nature of the fitting is also suitable for applications where there may be a risk of interference
• Pincers (both normal & side closing) are used to crimp the ears of the clamps and affect a proper seal
• Mild steel zinc plated construction

• Stainless Steel
• No. 304 SS Marine Grade
• Band Thickness 0.7mm
• DIN 3017

• SS Hoseclip 30-45mm

• Worm Drive
• Zinc Coated Mild Steel
• DIN 3017
• Qty: 30

• 2 Way Brake Connector
• For 3/16in. Pipe
• 10mm - 1.0mm Pitch
• Tube connector
• Qty:25

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mild Steel
• Zinc Plated
• Twin ear O Clips
• Pack of 50

• 3/8in. (8-11mm)

• Flexible Advance/Retard Hose
• 10m coil
• Black Nylon

• 4.0mm ID x 10.0mm OD

• Widely used for maintenance and OEM applications
• Mainly used on air, fluid, gas and steam lines as well as being suitable for low pressure hydraulic applications.
• Also referred to as lemon clips, double ear clips and 2-ear clips
• Absence of a screw mechanism allows 'O' clips to be used on extremely small hoses
• Tamper proof nature of the fitting is also suitable for applications where there may be a risk of interference
• Pincers (both normal & side closing) are used to crimp the ears of the clamps and affect a proper seal
• Mild steel zinc plated construction

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mini clips, also known as nut & bolt clips
• Ideal for small bore hoses with relatively low pressures, where little clamping force is required
• Used in applications such as securing fuel lines and heater hoses
• 7mm A/F screw fastening
• Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm