Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 12 of 38
Results 331 - 360 of 1129
Part number: MFL1151
Important compatibility info
| Function | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Hose Length | 180 mm |
| Inner diameter 1 | 11 mm |
| Inner diameter 2 | 6 mm |
| Type | Fuel Hose |
| Placement on Vehicle | Between heat exchanger and fuel filter |
ONLY
£13.37
£13.37
Part number: AC71JM
Important compatibility info
Additional Information
The XF Couplings offer excellent flow characteristics providing the workshop with increased airflow when required and enhanced tool efficiency. XF Couplings, commonly referred to as Euro couplings, are designed and manufactured in Sheffield by PCL.
- High flow rate of 130 cfm @ 100 psi
- Hardened steel construction with corrosive resistant finish
- Steel shoulder helps prevent accidental disconnection
- Enhances tool efficiency
- Thread size: R 1/2
- Thread type: Male
- Nominal Bore (mm): 7.4
- Flow Rate: 2200 l/min @ 6 bar supply
- Maximum Working Pressure: 35 bar / 508 psi
ONLY
£13.37
£13.37
Part number: EMH120
Important compatibility info
| Inner diameter 2 | 18 mm |
| Inner diameter 1 | 18 mm |
| Hose Length | 200 mm |
| Material | ACM (Polyacrylate) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£13.42
£13.42
Part number: 30882
Important compatibility info
| Title | CV Boot Clips 7 x 405mm - Pack of 20 |
Additional Information
- Stainless Steel
- 7.0mm Band Width
- Qty: 20
- 7mm Band x 405mm Max
ONLY
£13.53
£13.53
Part number: EMH646
Important compatibility info
| Function | Hose, crankcase ventilation |
| Hose Length | 265 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 10 mm |
| Colour | Black |
| Inner diameter 1 | 10 mm |
| Material | Plastic |
ONLY
£13.55
£13.55
Part number: PPC05
Important compatibility info
| Title | Petrol Pipe Clips 12-13mm - Pack of 25 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. The Pearl Fuel Hose Clips come in a pack of 25 and can be used when replacing or securing fuel hoses which are between 12mm – 13mm. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Specifically designed for petrol hose
- These clips do not lose their shape when tightened
- Pack of 25
ONLY
£13.55
£13.55
Part number: 1MMS
Important compatibility info
| Title | Hose Clips M/S 1M 32-45mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- Mild steel zinc protected
ONLY
£13.56
£13.56
Part number: EMH132
Important compatibility info
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Hose Length | 50 mm |
| Inner diameter 1 | 24.5 mm |
| Inner diameter 2 | 17.5 mm |
ONLY
£13.57
£13.57
Part number: EMH391
Important compatibility info
| Hose Length | 240 mm |
| Inner diameter 1 | 21.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 2 | 15.5 mm |
| Type | Hose, crankcase ventilation |
ONLY
£13.57
£13.57
Part number: JSC130MSP
Important compatibility info
| Title | Superclamp M/S 122-130mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Single nut adjustment
- Smooth band protects hose
- Bridge piece ensures 360 deg seal
- Solid trunion maximises torque
- Assembly by manual or automatic tools
- Chromium VI free finish on all materials
- Mild steel zinc plated
ONLY
£13.58
£13.58
Part number: 33854
Important compatibility info
| Hose Length | 220 mm |
| Function | Hose, crankcase ventilation |
| Weight | 0.072 kg |
| for OE number | 102 094 25 87 |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.65
£13.65
Part number: 36274
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Weight | 0.065 kg |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Upper |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.69
£13.69
Part number: EMH088
Important compatibility info
| Hose Length | 450 mm |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 14 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£13.69
£13.69
Part number: 35181
Important compatibility info
| Title | Fastflow Standard Female Adaptor - 1/2in. BSP - Pack Of 5 |
Additional Information
- For use with Connect Fastflow Airline Couplings
- Compatible with other popular airline couplings
ONLY
£13.76
£13.76
Part number: EMH198
Important compatibility info
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 16 mm |
| Hose Length | 150 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£13.76
£13.76
Part number: 38214
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Material | Rubber |
| Outer diameter | 26 mm. 17.6 mm |
| Inner diameter | 14 mm. 13 mm |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Weight | 0.052 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| for OE number | 102 094 58 82 |
| Hose Length | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.82
£13.82
Part number: EMH597
Important compatibility info
| Inner diameter 1 | 30.5 mm |
| Inner diameter 2 | 30.5 mm |
| Hose Length | 372 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£13.85
£13.85
Part number: 37213
Important compatibility info
ONLY
£13.88
£13.88
Part number: 37208
Important compatibility info
ONLY
£13.89
£13.89
Part number: 30809
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 5mm x 45mm - Pack Of 10 |
Additional Information
- Push Fit Connector
- ISO9001:2008
- 5.0mm ID x 45.0mm
ONLY
£13.91
£13.91
Part number: 103322
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Weight | 0.073 kg |
| Outer diameter | 26 mm |
| Inner diameter | 19 mm |
| Inner diameter 1 | 26.5 mm |
| Outer diameter 1 | 33.5 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.95
£13.95
Part number: EMH570
Important compatibility info
| Inner diameter 1 | 7 mm |
| Inner diameter 2 | 6.5 mm |
| Hose Length | 234 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£14.06
£14.06
Part number: 2MS
Important compatibility info
| Title | Hose Clips M/S 2 40-55mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- Mild steel zinc protected
ONLY
£14.09
£14.09
Part number: 2AMS
Important compatibility info
| Title | Hose Clips M/S 2A 35-50mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- Mild steel zinc protected
ONLY
£14.11
£14.11
Part number: EMH445
Important compatibility info
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 165 mm |
| Inner diameter 2 | 16 mm |
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 20 mm |
ONLY
£14.13
£14.13
Part number: EMH604
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Hose Length | 397 mm |
| Inner diameter 2 | 8.5 mm |
| Inner diameter 1 | 13.5 mm |
| Type | Hose, crankcase ventilation |
ONLY
£14.17
£14.17
Part number: 35189
Important compatibility info
| Title | Cyclone Male Coupling - 1/2in. BSP - Pack Of 2 |
Additional Information
- BSP Thread
- Quick Release coupling
- For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
- Pack of 2
ONLY
£14.20
£14.20
Part number: EMH128
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 16 mm |
| Hose Length | 180 mm |
| Inner diameter 1 | 17 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£14.23
£14.23
Part number: EMH490
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Hose Length | 140 mm |
| Inner diameter 2 | 16 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 17 mm |
ONLY
£14.24
£14.24
Part number: EMH644
Important compatibility info
| Inner diameter 2 | 7.5 mm |
| Inner diameter 1 | 7.5 mm |
| Hose Length | 827 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Hose, crankcase ventilation |
ONLY
£14.24
£14.24
Page 12 of 38
Hose & Pipe
