Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 9 of 38
Results 241 - 270 of 1129
Part number: BHC2009
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 5 |
ONLY
£11.25
£11.25
Part number: FHC2009
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 5 |
| Type | Fastening Clamp, charge air hose |
ONLY
£11.25
£11.25
Part number: 7026
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.3 m |
| Function | Hose |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 18 mm |
| Working pressure | 4.6 bar |
| Type | Hose |
ONLY
£11.28
£11.28
Part number: EMH364
Important compatibility info
| Material | Rubber |
| Inner diameter 1 | 12.5 mm |
| Colour | Black |
| Inner diameter 2 | 12.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 250 mm |
| Function | Hose, crankcase ventilation |
ONLY
£11.29
£11.29
Part number: EMH542
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Hose Length | 115 mm |
| Inner diameter 2 | 15 mm |
| Inner diameter 1 | 15 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£11.36
£11.36
Part number: 31160
Important compatibility info
| Title | Brass Olive - Barrel - 3/16in. - Pack Of 100 |
Additional Information
- Barrel Type
ONLY
£11.42
£11.42
Part number: JSC091MSP
Important compatibility info
| Title | Superclamp M/S 86-91mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Single nut adjustment
- Smooth band protects hose
- Bridge piece ensures 360 deg seal
- Solid trunion maximises torque
- Assembly by manual or automatic tools
- Chromium VI free finish on all materials
- Mild steel zinc plated
ONLY
£11.42
£11.42
Part number: 32880
Important compatibility info
| Title | Pipe Connector - T Piece Push-Fit - 5mm - Pack Of 10 |
Additional Information
- Equal Tee
- Plastic
- Metric Sizes
- Natural
- Qty: 10
- 5.0mm ID x L42 x H22
ONLY
£11.44
£11.44
Part number: FTH1478
Important compatibility info
| Function | Hose, crankcase ventilation |
| Length | 165 mm |
| Material | Plastic |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 16.3 mm |
| Inner diameter 2 | 28 mm |
ONLY
£11.46
£11.46
Part number: 30353
Important compatibility info
| Title | Black Nylon P Clips - 12mm - Pack of 100 |
Additional Information
- Black
- Nylon
- Pack of 100
- 12.0mm Cable diameter
ONLY
£11.48
£11.48
Part number: 36730
Important compatibility info
| Material | PA (polyamide) |
| Weight | 0.79 kg |
| Outer diameter | 17 mm |
| Inner diameter | 10 mm |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Lower |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Hose Length | 265 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£11.48
£11.48
Part number: EMH113
Important compatibility info
| Inner diameter 1 | 19.5 mm |
| Inner diameter 2 | 19.5 mm |
| Hose Length | 24 mm |
| Material | Metal |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£11.49
£11.49
Part number: EMH387
Important compatibility info
| Function | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 131 mm |
| Inner diameter 2 | 24.5 mm |
| Inner diameter 1 | 24.5 mm |
| Type | Hose, crankcase ventilation |
ONLY
£11.49
£11.49
Part number: PHH03C
Important compatibility info
| Title | Heater Hose & Clips 3/4in. x 1m |
Additional Information
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This length of heater hose from Pearl Automotive is 3/4 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This length of heater hose from Pearl Automotive is 3/4 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
- Black EPDM Resistant to Weather Ozone
- Heater hose & clips 3/4in. x 1m Made from EPDM rubber
ONLY
£11.49
£11.49
Part number: AC21JM
Important compatibility info
Additional Information
The Airflow Coupling is the original quick release in.PCLin. with around 75 years of design enhancement. This product, along with the Standard Adaptor, is still manufactured in the UK to the highest possible standards, with the in.Made in Sheffieldin. Airflow series now a benchmark in the UK for quality and reliability. Suitable for most compressed air applications - particularly fixed applications where the coupling is used over a workbench and a single action is preferred.
- Single action
- Steel construction
- Corrosive resistant finish
- Benchmark in the UK for quality and reliability
- Designed for fixed applications
- Thread size: R 1/2
- Thread Type: Male
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£11.51
£11.51
Part number: EMH663
Important compatibility info
| Material | Plastic |
| Hose Length | 240 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 14 mm |
| Colour | Black |
| Inner diameter 2 | 14 mm |
ONLY
£11.52
£11.52
Part number: EMH185
Important compatibility info
| Hose Length | 230 mm |
| Inner diameter 2 | 10 mm |
| Inner diameter 1 | 10 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£11.55
£11.55
Part number: AC91JM
Important compatibility info
Additional Information
Designed and manufactured in Sheffield by PCL, these quick release Vertex Couplings feature a double action mechanism. This makes them ideal in garages and tyreshops, where operators are using air tools or hand held inflators for trailing hose applications.
- Double action
- Protective shoulder helps to prevent dirt penetration
- Steel construction
- Corrosive resistant finish
- Ideal for use in the garage and tyreshop environments
- Designed for trailing hose applications
- Temperature range: -40°C to 100°C
- Maximum working pressure: 14 bar / 200 psi
- Flow rate: 43 cfm @ 100 psi
- Nominal bore: 4.8 mm
- Thread type: Male
- Thread size: R 1/2
ONLY
£11.57
£11.57
Part number: 30881
Important compatibility info
| Title | CV Boot Clips 7 x 245mm - Pack of 20 |
Additional Information
- Stainless Steel
- 7.0mm Band Width
- Qty: 20
- 7mm Band x 245mm Max
ONLY
£11.60
£11.60
Part number: MFL1364
Important compatibility info
| Material | Plastic |
| Inner diameter 1 | 8 mm |
| Colour | Black |
| Inner diameter 2 | 8 mm |
| Type | Fuel Hose |
| Hose Length | 190 mm |
| Function | Fuel Hose |
ONLY
£11.63
£11.63
Part number: EMH575
Important compatibility info
| Hose Length | 445 mm |
| Inner diameter 2 | 20 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 20 mm |
| Type | Hose, crankcase ventilation |
ONLY
£11.69
£11.69
Part number: JSC112MSP
Important compatibility info
| Title | Superclamp M/S 104-112mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Single nut adjustment
- Smooth band protects hose
- Bridge piece ensures 360 deg seal
- Solid trunion maximises torque
- Assembly by manual or automatic tools
- Chromium VI free finish on all materials
- Mild steel zinc plated
ONLY
£11.77
£11.77
Part number: PCP681
Important compatibility info
| Title | Rubber Lined Pipe Clips - 13mm - Pack of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems.
As part of their automotive spares and accessories range Pearl supply a range of replacement/spare pipe clips suitable for automotive use. These clips come as a pack of 10 and are able to hold and secure pipes of 6mm. It has a rubber inner lining to protect the pipes.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare pipe clips suitable for automotive use. These clips come as a pack of 10 and are able to hold and secure pipes of 6mm. It has a rubber inner lining to protect the pipes. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pipe clips with a fixing hole which is rubber lined to protect damage to any pipe
- Rubber lined
- Protects damaged to any pipe
ONLY
£11.80
£11.80
Part number: 2960-00051
Important compatibility info
| Additional Information 3 | Resists weathering, abrasion and tearing. |
| Specification | Meets military specifications MILR3065C. |
| Additional Information 2 | Specially compounded rubber conducts static electricity. |
| Additional Information | Discharges potentially dangerous static electricity from equipment when properly grounded, up to 100 ohm-cm (maximum). |
ONLY
£11.82
£11.82
Part number: BTH1478
Important compatibility info
| Function | Hose, crankcase ventilation |
| Length | 165 mm |
| Material | Plastic |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 16.3 mm |
| Inner diameter 2 | 28 mm |
ONLY
£11.83
£11.83
Part number: EMH399
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | ACM (Polyacrylate) |
| Inner diameter 1 | 7 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 445 mm |
| Inner diameter 2 | 7 mm |
ONLY
£11.84
£11.84
Part number: EMH782
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Type | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 13 mm |
| Function | Hose, crankcase ventilation |
| Hose Length | 220 mm |
ONLY
£11.84
£11.84
Part number: MFL1272
Important compatibility info
| Colour | White-transparent |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Material | Plastic |
| Placement on Vehicle | between fuel filter and injection pump |
ONLY
£11.84
£11.84
Part number: PPH08C
Important compatibility info
| Title | Rubber Fuel Hose 8mm & Clips 5/16in. x 1m |
Additional Information
Over time hose and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This roll of fuel hose from Pearl Automotive is 5/16 inch hose with a 8mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This roll of fuel hose from Pearl Automotive is 5/16 inch hose with a 8mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.
- Suitable for use with leaded & unleaded petrol
- 1m length with clips
ONLY
£11.84
£11.84
Part number: 31114
Important compatibility info
| Title | Hose Connector - Barb Pipe To Push-Fit - 8mm To 6mm - Pack Of 10 |
Additional Information
- Pipe to Push-Fit
- ISO9001:2008
ONLY
£11.93
£11.93
Page 9 of 38
Hose & Pipe
