Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 2 of 39
Results 31 - 60 of 1158
Part number: PWN257
Important compatibility info
| Title | Hose Clips M/S 1A 22-30mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.46
£4.46
Part number: PWN258
Important compatibility info
| Title | Hose Clips M/S 1 25-35mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.46
£4.46
Part number: PWN259
Important compatibility info
| Title | Hose Clips M/S 1X 27-40mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.46
£4.46
Part number: PWN532
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 10mm |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 10mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects three hoses
- Waterproof
ONLY
£4.46
£4.46
Part number: PWN586
Important compatibility info
| Title | Hose Clips S/S OOO 8-12mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£4.46
£4.46
Part number: PWN589
Important compatibility info
| Title | Hose Clips S/S OX 16-25mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£4.46
£4.46
Part number: EMH578
Important compatibility info
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 11 mm |
| Hose Length | 90 mm |
| Inner diameter 2 | 11 mm |
ONLY
£4.57
£4.57
Part number: EMH337
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 7 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Hose Length | 225 mm |
ONLY
£4.63
£4.63
Part number: MFL1110
Important compatibility info
| Type | Fuel Hose |
| Inner diameter 2 | 8.5 mm |
| Colour | Black |
| Inner diameter 1 | 7.5 mm |
| Function | Fuel Hose |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Hose Length | 185 mm |
| Placement on Vehicle | from fuel tank to fuel pump |
ONLY
£4.65
£4.65
Part number: PHC674
Important compatibility info
| Title | Hose Connector - T Piece Push-Fit - 5mm - Pack Of 10 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Pearl have designed a range of hoses for a wide range of applications. This Pearl Hose Connector comes in a pack of 10. The connector is a t-piece type, meaning it will connect three hoses, and has a 5mm outside diameter. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Constructed of plastic that will connect two hoses
- T Piece Push-Fit
- Pack of 10
ONLY
£4.78
£4.78
Part number: MFL1108
Important compatibility info
| Colour | Black |
| Hose Length | 310 mm |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Inner diameter 2 | 8.5 mm |
| Inner diameter 1 | 8 mm |
| Placement on Vehicle | Fuel Tank |
ONLY
£4.79
£4.79
Part number: PWN530
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 6mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a pack of 2. It is a 'Y' piece connector with a size of 6mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects three hoses
- Waterproof
ONLY
£4.79
£4.79
Part number: PWN525
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 8mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 8mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects two hoses
- Waterproof
ONLY
£4.81
£4.81
Part number: ACA2488
Important compatibility info
| Title | Standard Adaptor 9.5mm (3/8) i/d Hose Tailpiece |
Additional Information
The PCL Standard Air Line Adaptor is suitable for most compressed air applications. Designed and manufactured alongside PCL couplings, this range of Standard Adaptors has become the benchmark in the UK for quality and reliability. Designed for use with Airflow and Vertex Couplings.
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex and Safeflow Safety Couplings
- Thread size: 9.5mm (3/8)
- Thread type: Hose Tailpiece
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£4.82
£4.82
Part number: ACA1793
Important compatibility info
| Title | Standard Adaptor 6.35mm (1/4) i/d Hose Tailpiece |
Additional Information
The PCL Standard Air Line Adaptor is suitable for most compressed air applications. Designed and manufactured alongside PCL couplings, this range of Standard Adaptors has become the benchmark in the UK for quality and reliability. Designed for use with Airflow and Vertex Couplings.
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex and Safeflow Safety Couplings
- Thread size: 6.35mm (1/4)
- Thread type: Hose Tailpiece
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£4.84
£4.84
Part number: HC2985
Important compatibility info
Additional Information
Perfect for repairing damage along a line of hose, or for connecting two lengths of hose together.
- in.Perfect for repairing damage along a line of hose, or for connecting two lengths of hose togethein.
- Hose Internal Diameter: 9.5 mm / 3/8 in
ONLY
£4.85
£4.85
Part number: PWN261
Important compatibility info
| Title | Hose Clips M/S 2 40-55mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.89
£4.89
Part number: PWN594
Important compatibility info
| Title | Hose Clips S/S 2 40-60mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£4.89
£4.89
Part number: BHC2005S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 59 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.11
£5.11
Part number: FHC2005S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 59 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.11
£5.11
Part number: EMH325
Important compatibility info
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 126 mm |
| Colour | Black |
| Inner diameter 2 | 18 mm |
| Type | Hose, crankcase ventilation |
ONLY
£5.15
£5.15
Part number: 102470
Important compatibility info
| Length | 40.5 mm |
| Inner diameter | 14 mm |
| Inner diameter 1 | 10 mm |
| Function | Hose, transmission oil cooler |
| Transmission Type | for automatic transmission |
| Weight | 0.003 kg |
| Type | Hose, transmission oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£5.17
£5.17
Part number: PWN527
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 16mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 16mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects two hoses
- Waterproof
ONLY
£5.26
£5.26
Part number: EMH538
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 20 mm |
| Inner diameter 1 | 28.5 mm |
| Hose Length | 355 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£5.37
£5.37
Part number: PWN260
Important compatibility info
| Title | Hose Clips M/S 2A 35-50mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.38
£5.38
Part number: PWN526
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 13mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 13mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects two hoses
- Waterproof
ONLY
£5.40
£5.40
Part number: EMH615
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 13 mm |
| Colour | Black |
| Inner diameter 2 | 13 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 145 mm |
| Function | Hose, crankcase ventilation |
ONLY
£5.45
£5.45
Part number: EMH580
Important compatibility info
| Hose Length | 115 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 19 mm |
ONLY
£5.47
£5.47
Part number: AXC00165
Important compatibility info
| Title | Worm Drive Hose Clips 20 - 32 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 20 - 32 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.51
£5.51
Part number: MFL1109
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 8 mm |
| Hose Length | 240 mm |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Inner diameter 1 | 8 mm |
| Placement on Vehicle | from fuel tank to fuel pump |
ONLY
£5.53
£5.53
Page 2 of 39
Hose & Pipe
