Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 33 of 34
Results 961 - 990 of 1002
Part number: PWN261
Important compatibility info
| Title | Hose Clips M/S 2 40-55mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.49
£5.49
Part number: ACA2488
Important compatibility info
| Title | Standard Adaptor 9.5mm (3/8) i/d Hose Tailpiece |
Additional Information
The PCL Standard Air Line Adaptor is suitable for most compressed air applications. Designed and manufactured alongside PCL couplings, this range of Standard Adaptors has become the benchmark in the UK for quality and reliability. Designed for use with Airflow and Vertex Couplings.
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex and Safeflow Safety Couplings
- Thread size: 9.5mm (3/8)
- Thread type: Hose Tailpiece
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£5.48
£5.48
Part number: 83404
Important compatibility info
| Title | R Clips - 4mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 4mm diameter
- Length 75mm
ONLY
£5.46
£5.46
Part number: ACA1793
Important compatibility info
| Title | Standard Adaptor 6.35mm (1/4) i/d Hose Tailpiece |
Additional Information
The PCL Standard Air Line Adaptor is suitable for most compressed air applications. Designed and manufactured alongside PCL couplings, this range of Standard Adaptors has become the benchmark in the UK for quality and reliability. Designed for use with Airflow and Vertex Couplings.
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex and Safeflow Safety Couplings
- Thread size: 6.35mm (1/4)
- Thread type: Hose Tailpiece
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£5.46
£5.46
Part number: PWN525
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 8mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 8mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects two hoses
- Waterproof
ONLY
£5.37
£5.37
Part number: PHC674
Important compatibility info
| Title | Hose Connector - T Piece Push-Fit - 5mm - Pack Of 10 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Pearl have designed a range of hoses for a wide range of applications. This Pearl Hose Connector comes in a pack of 10. The connector is a t-piece type, meaning it will connect three hoses, and has a 5mm outside diameter. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Constructed of plastic that will connect two hoses
- T Piece Push-Fit
- Pack of 10
ONLY
£5.34
£5.34
Part number: EMH337
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 7 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Hose Length | 225 mm |
ONLY
£5.29
£5.29
Part number: EMH578
Important compatibility info
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 11 mm |
| Hose Length | 90 mm |
| Inner diameter 2 | 11 mm |
ONLY
£5.19
£5.19
Part number: FHC2005S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 59 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.11
£5.11
Part number: PWN258
Important compatibility info
| Title | Hose Clips M/S 1 25-35mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.07
£5.07
Part number: PWN259
Important compatibility info
| Title | Hose Clips M/S 1X 27-40mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.07
£5.07
Part number: PWN257
Important compatibility info
| Title | Hose Clips M/S 1A 22-30mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.06
£5.06
Part number: PWN586
Important compatibility info
| Title | Hose Clips S/S OOO 8-12mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£5.06
£5.06
Part number: PWN532
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 10mm |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 10mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects three hoses
- Waterproof
ONLY
£5.05
£5.05
Part number: PWN187
Important compatibility info
| Title | Bypass Hose Clip - British Leyland A Series |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Replacement hose & clip for the bypass from cylinder head to water pump
- Flexible rubber, replacement for the solid OE type
- Supplied with clips
ONLY
£5.02
£5.02
Part number: AXC00163
Important compatibility info
| Title | Worm Drive Hose Clips 12 - 22 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 12 - 22 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£4.97
£4.97
Part number: AXC00164
Important compatibility info
| Title | Worm Drive Hose Clips 16 - 25 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 16 - 25 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£4.97
£4.97
Part number: AXC00161
Important compatibility info
| Title | Worm Drive Hose Clips 10 - 16 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 10 - 16 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£4.95
£4.95
Part number: AXC00160
Important compatibility info
| Title | Worm Drive Hose Clips 8 - 12mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 8 - 12mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£4.93
£4.93
Part number: EMH333
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 1 | 4 mm |
| Hose Length | 85 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 2 | 4 mm |
| Type | Hose, crankcase ventilation |
ONLY
£4.90
£4.90
Part number: HC1206
Important compatibility info
| Title | Hose Tail 7.9mm (5/16) i/d Hose to Male Thread R 1/4 |
Additional Information
This corrosive-resistant, plated Hose Tail Adaptor connects the hose to a female fitting.
- Corrosive-resistant
- Connects the hose to a female fitting
- Hose Internal Diameter: 7.9mm (5/16 in)
- Male Thread: R 1/4
ONLY
£4.89
£4.89
Part number: PWN253
Important compatibility info
| Title | Hose Clips M/S OOO 8-12mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.82
£4.82
Part number: PWN254
Important compatibility info
| Title | Hose Clips M/S OO 13-20mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.82
£4.82
Part number: PWN255
Important compatibility info
| Title | Hose Clips M/S O 16-22mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.82
£4.82
Part number: PWN256
Important compatibility info
| Title | Hose Clips M/S OX 18-25mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.82
£4.82
Part number: PWN1100
Important compatibility info
| Title | Hose Clip - 10 to 16mm MOO - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The zinc plated hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- 12mm Wide Band
- MOO Size
- Zinc Plated
ONLY
£4.79
£4.79
Part number: PWN524
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 6mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 6mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects two hoses
- Waterproof
ONLY
£4.79
£4.79
Part number: PWN531
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 8mm |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 8mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects three hoses
- Waterproof
ONLY
£4.79
£4.79
Part number: PWN488
Important compatibility info
| Title | Petrol Pipe Clips 15-17mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Wot-Nots supply a range of replacement/spare hose/pipe clips suitable for automotive use. These Petrol pipe clips come as a pack of 2 and are 15mm-17mm. These clips do not lose their shape when tightened. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Specifically designed for petrol hose
- These clips do not lose their shape when tightened
- Zinc Plated
ONLY
£4.65
£4.65
Part number: PWN489
Important compatibility info
| Title | Petrol Pipe Clips 18-20mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Wot-Nots supply a range of replacement/spare hose/pipe clips suitable for automotive use. These Petrol pipe clips come as a pack of 2 and are 18mm-20mm. These clips do not lose their shape when tightened. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Specifically designed for petrol hose
- These clips do not lose their shape when tightened
- Zinc Plated
ONLY
£4.65
£4.65
Page 33 of 34
Hose & Pipe
