Hose & Pipe

• Pipe to Push-Fit
• ISO9001:2008

This roll of heater hose from Pearl Automotive is 5/8 inch hose (16mm). It comes in a 1m length made from MBR.CR suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
• Black EPDM Resistant to Weather Ozone

• Heater hose & clips 5/8in. x 1m Made from EPDM rubber

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Aluminium air duct hose
• Flexible hose makes for easier routing
• Heat resistant from -40 to +250 degrees celsius

• Push Fit Connector
• Metric Sizes
• ISO9001:2008
• Qty: 5

This roll of fuel hose from Pearl Automotive is 3/8 inch hose with a 6mm internal diameter. It comes in a 1m roll made from MBR.CR suitable for leaded and unleaded fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.
• Suitable for use with leaded & unleaded petrol
• 1m length with clips

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards
• Made from mild steel zinc plated
• Pack of 10

• Euro Universal Male Adaptor
• Zinc Clear Finish
• Compatible with other popular air line fittings

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Push Fit Connector
• Metric Sizes
• ISO9001:2008
• Qty: 5

This length of heater hose from Pearl Automotive is 3/8 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
• Black EPDM Resistant to Weather Ozone

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2X hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• Single nut adjustment
• Smooth band protects hose
• Bridge piece ensures 360 deg seal
• Solid trunion maximises torque
• Assembly by manual or automatic tools
• Chromium VI free finish on all materials
• Mild steel zinc plated

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2A hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10