Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 17 of 39
Results 481 - 510 of 1170
Part number: 0SS
Important compatibility info
| Title | Hose Clips S/S 0 16-22mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- 304 grade stainless steel
ONLY
£23.19
£23.19
Part number: MFL1207
Important compatibility info
| Hose Length | 455 mm |
| Placement on Vehicle | High pressure pump to fuel distributor |
| Material | Plastic |
| Colour | White-transparent |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Inner diameter 1 | 6 mm |
| Type | Fuel Hose |
ONLY
£23.18
£23.18
Part number: 31197
Important compatibility info
| Title | Brake Tube Connector - Female - 3/8in. UNF x 24 TPI - Pack Of 25 |
Additional Information
- Brake Tube Connector
- For 3/16in. Pipe
- UNF Female
- 3/8in. UNF x 24T-Piece
- Qty: 25
ONLY
£23.16
£23.16
Part number: 31198
Important compatibility info
| Title | Brake Tube Connector - Female - 10mm x 1.0mm - Pack Of 25 |
Additional Information
- Brake Tube Connector
- For 3/16in. Pipe
- MM Female
- 1.0mm Pitch x 10mm
- Qty: 25
ONLY
£23.13
£23.13
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£23.12
£23.12
Part number: 45531
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 17.5 mm |
| Weight | 0.119 kg |
| Material | Rubber |
| Inner diameter | 17.5 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Inner diameter 1 | 13.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£23.10
£23.10
Part number: 4219-06184
Important compatibility info
ONLY
£22.99
£22.99
Part number: EMH199
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
ONLY
£22.94
£22.94
Part number: MFL1246
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, fuel overflow |
| Inner diameter 2 | 2.5 mm |
| Hose Length | 835 mm |
| Inner diameter 1 | 3.5 mm |
| Function | Hose, fuel overflow |
ONLY
£22.89
£22.89
Part number: 27220
Important compatibility info
| Weight | 0.133 kg |
| Function | Hydraulic Hose, steering |
| Placement on Vehicle | from fluid reservoir to hydraulic pump |
| Wall Thickness | 3.5 mm |
| Type | Hydraulic Hose, steering |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 320 mm |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.84
£22.84
Part number: 47228
Important compatibility info
| Placement on Vehicle | Upper |
| Function | Hose, crankcase ventilation |
| Weight | 0.039 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.72
£22.72
Part number: EMH512
Important compatibility info
| Function | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 214 mm |
| Inner diameter 2 | 10 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Inner diameter 1 | 10 mm |
ONLY
£22.71
£22.71
Part number: EMH183
Important compatibility info
| Function | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 15.5 mm |
| Inner diameter 2 | 16.5 mm |
| Hose Length | 415 mm |
| Type | Hose, crankcase ventilation |
ONLY
£22.70
£22.70
Part number: NB1517
Important compatibility info
| Title | Junior Clips M/S 15-17mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.
The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.70
£22.70
Part number: NB1618
Important compatibility info
| Title | Junior Clips M/S 16-18mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.70
£22.70
Part number: 30818
Important compatibility info
| Title | Twin Ear O Clips 15-18mm - Pack of 50 |
Additional Information
- Mild Steel
- Zinc Plated
- Twin ear O Clips
- Pack of 50
- 19/32in. (15-18mm)
ONLY
£22.66
£22.66
Part number: 100654
Important compatibility info
| Inner diameter | 5 mm |
| Function | Fuel Hose |
| Suited for fuel type | Ethanol Blended Petrol (E10) |
| Type | Fuel Hose |
| Weight | 0.02 kg |
| Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.61
£22.61
Part number: 3225-00072
Important compatibility info
ONLY
£22.61
£22.61
Part number: EMH656
Important compatibility info
| Function | Hose, crankcase ventilation |
| Hose Length | 280 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Inner diameter 2 | 16 mm |
| Material | Plastic |
| Inner diameter 1 | 16 mm |
ONLY
£22.61
£22.61
Part number: NB1214
Important compatibility info
| Title | Junior Clips M/S 12-14mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.60
£22.60
Part number: MFL1230
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Hose Length | 940 mm |
| Inner diameter 1 | 9 mm |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£22.58
£22.58
Part number: BHC1103
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 43 mm |
| Diameter To | 47 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£22.57
£22.57
Part number: FHC1103
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 43 mm |
| Diameter To | 47 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£22.57
£22.57
Part number: 30794
Important compatibility info
| Title | Hose Clips S/S 25-40mm - Pack of 10 |
Additional Information
- Stainless Steel
- No. 304 SS Marine Grade
- Band Thickness 0.7mm
- DIN 3017
- SS Hoseclip 25-40mm
ONLY
£22.56
£22.56
Part number: 32883
Important compatibility info
| Title | Pipe Connector - T Piece Push-Fit - 10mm - Pack Of 10 |
Additional Information
- Equal Tee
- Plastic
- Metric Sizes
- Natural
- Qty: 10
- 10.0mm ID x L62 x H33
ONLY
£22.50
£22.50
Part number: NB1416
Important compatibility info
| Title | Junior Clips M/S 14-16mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.49
£22.49
Part number: MFL1229
Important compatibility info
| Colour | White-transparent |
| Function | Fuel Hose |
| Hose Length | 1000 mm |
| Material | Plastic |
| Type | Fuel Hose |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 6 mm |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
ONLY
£22.42
£22.42
Part number: EMH636
Important compatibility info
| Hose Length | 330 mm |
| Inner diameter 2 | 18.5 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 18.5 mm |
ONLY
£22.39
£22.39
Part number: 30939
Important compatibility info
| Title | Fuel Hose - Over Braided - Black - 5.0mm ID - 5m |
Additional Information
- Resistant to Oil, Petrol & Diesel
- Temp up to 100C
- 5m coil
ONLY
£22.38
£22.38
Part number: 100503
Important compatibility info
| Weight | 0.102 kg |
| Material | Thermoplast |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.24
£22.24
Page 17 of 39
Hose & Pipe
