Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 16 of 38
Results 451 - 480 of 1129
Part number: FHC1107
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 59 mm |
| Diameter To | 63 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£23.55
£23.55
Part number: 4168-08019
Important compatibility info
ONLY
£23.54
£23.54
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£23.53
£23.53
Part number: EMH084
Important compatibility info
| Hose Length | 285 mm |
| Inner diameter 1 | 28.5 mm |
| Inner diameter 2 | 14.5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£23.50
£23.50
Part number: MFL1195
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£23.38
£23.38
Part number: 7038
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.6 m |
| Function | Hose |
| Working pressure | 1.8 bar |
| Inner diameter 2 | 60 mm |
| Inner diameter 1 | 60 mm |
| Type | Hose |
ONLY
£23.34
£23.34
Part number: BHC1105
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 51 mm |
| Diameter To | 55 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£23.27
£23.27
Part number: BHC1106
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 55 mm |
| Diameter To | 59 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£23.27
£23.27
Part number: FHC1105
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 51 mm |
| Diameter To | 55 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£23.27
£23.27
Part number: FHC1106
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 55 mm |
| Diameter To | 59 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£23.27
£23.27
Part number: 30976
Important compatibility info
| Title | Female Coupling - 1/4 BSP - Pack of 1 |
Additional Information
- Euro Universal Female Coupling
- British Standard Pipe (BSP) Thread
- Zinc Clear Finish
- Compatible with other popular air line fittings
ONLY
£23.26
£23.26
Part number: 0SS
Important compatibility info
| Title | Hose Clips S/S 0 16-22mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- 304 grade stainless steel
ONLY
£23.19
£23.19
Part number: MFL1207
Important compatibility info
| Hose Length | 455 mm |
| Placement on Vehicle | High pressure pump to fuel distributor |
| Material | Plastic |
| Colour | White-transparent |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Inner diameter 1 | 6 mm |
| Type | Fuel Hose |
ONLY
£23.18
£23.18
Part number: 45531
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 17.5 mm |
| Weight | 0.119 kg |
| Material | Rubber |
| Inner diameter | 17.5 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Inner diameter 1 | 13.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£23.12
£23.12
Part number: 4219-06184
Important compatibility info
ONLY
£22.99
£22.99
Part number: 3225-00072
Important compatibility info
ONLY
£22.93
£22.93
Part number: EMH199
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
ONLY
£22.92
£22.92
Part number: MFL1245
Important compatibility info
| Function | Hose, fuel overflow |
| Inner diameter 2 | 2.5 mm |
| Inner diameter 1 | 3.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Hose Length | 845 mm |
| Type | Hose, fuel overflow |
ONLY
£22.89
£22.89
Part number: 47228
Important compatibility info
| Placement on Vehicle | Upper |
| Function | Hose, crankcase ventilation |
| Weight | 0.039 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.72
£22.72
Part number: NB1517
Important compatibility info
| Title | Junior Clips M/S 15-17mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.
The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.70
£22.70
Part number: NB1618
Important compatibility info
| Title | Junior Clips M/S 16-18mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.70
£22.70
Part number: 36903
Important compatibility info
| Weight | 0.17 kg |
| Colour | Black |
| Placement on Vehicle | from cooling pipe to hydraulic pump |
| Length | 615 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hydraulic Hose, steering |
| Driver Position | for left-hand/right-hand drive vehicles |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.67
£22.67
Part number: EMH656
Important compatibility info
| Function | Hose, crankcase ventilation |
| Hose Length | 280 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Inner diameter 2 | 16 mm |
| Material | Plastic |
| Inner diameter 1 | 16 mm |
ONLY
£22.65
£22.65
Part number: MFL1358
Important compatibility info
| Inner diameter 2 | 8.25 mm |
| Type | Hose, fuel overflow |
| Material | Plastic |
| Inner diameter 1 | 10.25 mm |
| Colour | Black |
| Hose Length | 1320 mm |
| Function | Hose, fuel overflow |
ONLY
£22.64
£22.64
Part number: 100654
Important compatibility info
| Inner diameter | 5 mm |
| Function | Fuel Hose |
| Suited for fuel type | Ethanol Blended Petrol (E10) |
| Type | Fuel Hose |
| Weight | 0.02 kg |
| Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.61
£22.61
Part number: EMH141
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 12 mm |
| Hose Length | 290 mm |
| Type | Hose, crankcase ventilation |
ONLY
£22.61
£22.61
Part number: MFL1297
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, fuel overflow |
| Function | Hose, fuel overflow |
ONLY
£22.61
£22.61
Part number: NB1214
Important compatibility info
| Title | Junior Clips M/S 12-14mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.60
£22.60
Part number: MFL1230
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Hose Length | 940 mm |
| Inner diameter 1 | 9 mm |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£22.58
£22.58
Part number: BHC1103
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 43 mm |
| Diameter To | 47 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£22.57
£22.57
Page 16 of 38
Hose & Pipe
