Workshop Tools

• Precision knurling located on the shaft and female drive end for better control when hand threading.
• Laser engraved size ID for quick and easy identification.
• Chrome finish for corrosion and rust protection.

• 3/8in. x 10mm ID Hose
• 0.6m (2') Long
• Comes with Tailpiece & adaptor
• Air line Whip Hose
• Essential workshop tool

• Polished Chrome grip ratchet
• Quick release button
• Ratchets have slim profile for use in tight spots
• Made of high-strength alloy steel with chrome-plated finish
• Push button quick release

General Information

Flexi-Hose & Connector. Flexi-Hose & Connector

• Flexi Hose and Connector for use with grease guns 0241A and 0240B
• Nylon material
• For use where the standard fixed hose will not fit Grease jaws before use

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Keys feature long hex arm for access in hard to reach areas
• Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification
• Sizes: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm & 10 mm

• Magnetic ball on long arm allows better angle of entry for hard to reach areas plus fastener control, set also features short hex arm for tight fit access & color coded hex key holder for convenient storage & identification

• Metric Thread
• 90 Degree Angle Profile
• Qty: 25

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

Crimping Set 30pc Crimping Set 30pc.

• For the practical handyman, this universal crimping tool comes complete with 30 terminals
• Crimps insulated and non-insulated terminals
• Moulded grip handle for easier use
• Includes wire strippers and cutters

• Individually packaged Star Bits
• Further socket sizes available in this range T7-T50
• Socket manufactured from Chrome Vanadium, bit from Silicon Steel
• 1/2in.D

• FOUR FLAT™ sides on socket deter rolling.
• Wrench ready FOUR FLAT™ sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Single Barrel Foot Pump is suitable for car, motorcycle & bicycle tyres
• Also suitable for balls, toys, and many other inflatable objects
• Supplied with a 100psi/0.7 bar pressure gauge, a 24” hose with rust proof valve connector
• Includes special adaptors for bicycles, footballs, cushions and other inflatables
• With a built in pedal locking bar, assists easy storage when not in use
• For accurate tyre pressure maintenance it is recommended that you check your tyre pressure on a regular basis
• Max Pressure (PSI): 100psi
• Flow rate: (Litres/Min): 100psi
• Product Dimensions (L x W x H): 24 x 9 x 8cm

• Conforms to EN16051:2012

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Ball detent design for superior impact socket retention.
• Dual hole design and groove for security accessories.

• Precision knurling located on the shaft and female drive end for better control when hand threading.
• Laser engraved size ID for quick and easy identification.
• Chrome finish for corrosion and rust protection.

• High-Strength Impact Socket for up to 2x Longer Life Than Regular Thin Wall Impact Sockets
• Protective Outer Sheath Prevents Damage to Wheels
• Insert Protects Lug Nuts and Bolts from Damage
• Manganese Phosphate Coating to Resist Corrosion

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Open end with Anti-slip function
• CR-V alloy steel for long lasting durability.
• Nickel chrome plated for long lasting protection.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• Worldwide patent.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Metric Thread
• 90 Degree Angle Profile
• Qty: 25

• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas
• AWS A5.20 E71T-GS

• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas
• AWS A5.20 E71T-GS

• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 8 mm

General Information

Washer Jet Tool (CD) Washer Jet Tool (CD).

• Double ended washer jet tool
• Suitable for cleaning out blocked washer jets and redirecting
• Knurled body gives added grip, complete with a pocket clip
• One screw end reveals fine pin point for cleaning out
• Other end gives a firmer tool for redirecting onto the windscreen

• Individually packaged Star Bits
• Further socket sizes available in this range T7-T50
• 1/2in.D
• Socket manufactured from Chrome Vanadium, bit from Silicon Steel