Workshop Tools

• Short Star Arm for tight fit access
• Color coded Hex Key holder for convenient storage & Identification
• Magnetic long Star Key set

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• 6 Point
• 90 Tooth Count
• Polished Chrome
• Corrosion Resistant
• Features a non-slip ratchet end and non-slip open end

• The 90 tooth count gear allows 4 degree arc swing

• 6 Point
• 90 Tooth Count
• Polished Chrome
• Corrosion Resistant
• Features a non-slip ratchet end and non-slip open end

• The 90 tooth count gear allows 4 degree arc swing

• Sizes: Green 8/10/12mm (SAE 0.3150-0.4720), Yellow 4/5/6mm (SAE 0.1575- 0.2382), Red 2/3mm (SAE 0-0787-0.1181)
• Plastic construction
• Colour coded
• For checking wear on brake linings
• Sizes required

• Adaptors for changing drive sizes
• 1/2in. drive < 3/4in. drive, 1/2in. drive > 3/8in., 3/8in. drive < 1/4in. drive
• Professional

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• This metal band wrench will remove any cylindrical object up to a diameter of 120mm
• Suitable for old style oil filter wrenches
• Turn knob adjustment
• Suitable for old style oil filters
• 65-105mm diameter

• This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models
• Manufactured from Chrome Molybdenum
• Correctly hardened
• Impact quality

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Metal ball detent clip for superior socket retention.
• Usable with impact and chrome sockets.
• Holes in rail are on top and on the bottom for easy mounting.

• FOUR FLAT™ sides on socket deter rolling.
• Wrench ready FOUR FLAT™ sides.
• Stamped sizes for easy visibility.
• Chrome finish.

General Information

Magnetic Pick Up Tool 1.6kgs Magnetic Pick Up Tool 1.6kgs.

• Pick up tool
• Lifts 1.6kg
• Extends from 170mm to 670mm
• Protective sleeve to stop magnet sticking to the engine
• Soft grip handle
• Stainless steel

• This deluxe 100PSI double barrel foot pump is designed to provide you with a long lasting performance
• Comes with a reinforced base at the bottom of both cylinders which enables the rods to smoothly glide into barrels. This helps to reduce strain on the cylinder end caps on both barrels
• It also has a wide base that provides better stability when the foot pump is in use as well as a anti-slip tread plate. Plus, the pump has a retaining clip that runs the whole width of the foot pedal which makes it more secure when storing the foot pump
• Suitable for inflating tyres on cars, motorcycles & bicycles and it has a trigger lock valve adaptor. It also comes supplied with two nozzle adaptors for inflating footballs, cushions and other inflatables
• Features an analogue display pressure gauge that provides readings in both PSI and Bar
• Max Pressure (PSI): 100psi
• Product Dimensions (L x W x H): 24 x 15 x 8.5cm

• Conforms to EN16051:2012

• Pinch proof design.
• Press the PUSH button for smooth position adjustments.
• Machined parts with 20 smooth position adjustments.
• Grip tie by squeezing lower jaw handle. One hand wrenching.
• High carbon alloy steel,Face finish: black+polish,Jaw capacity 42mm Max.

• Mirror polished Chrome plated finish
• TS8H, TS10H, TS15H, TS20H, TS25H, TS27H, TS30H, TS40H, TS45H, TS50H & TS55H
• Includes color coded rail for convenient storage and identification
• Precision designed tamper proof 5 star tips ensure eccurate fastener fit

• Mirror polished Chrome plated finish
• 12 Point
• Radius cornered offset chamfered box end provides precise fastener control
• 15 degree angled open end for greater access

• Grips most sheets of wet and dry sanding material
• Flexible for a smooth contoured finish
• Rubber
• Design helps protect fingers
• Black

• Imperial Threads
• Straight Profile
• Qty: 50

• Filter wrench
• Aluminium handle
• Handles diameters up to 125mm

Maypole’s mild steel welding wire is suitable for use with Mig welders. This particular wire is designed for use when welding with gas, including any of the following: CO2, Argon or a CO2 and Argon mix. This reel of wire is 0.8mm thick and 0.7kg in weight.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mild Steel Mig Welding Wire (0.8mm/0.7Kg)
• Copper coated
• Comes in a wound spool

• Flour flat sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish.

• Metric Thread
• Straight Profile
• Qty: 50

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Metric Thread
• Straight Profile
• Qty: 50

• FOUR FLAT™ sides on socket deter rolling.
• Wrench ready FOUR FLAT™ sides.
• Stamped sizes for easy visibility.
• Chrome finish.