Quinton Hazell CV Joint Boot Kit Outer
Part number: Quinton Hazell QJB8000
£11.03
Inc VAT
Product Description
Information
Installation Information
Fitting Instruction 1 Remove the road wheel and hub. Remove the old boot and clips. Clean any grease or debris from the shaft and joint . 2 Check fitting cone for sharp or rough areas. Smooth with emery cloth if necessary. Spray outer with cone spray. 3 If fitting the new boot to an outer CV joint, turn the boo t inside out. (this will almost always be the case) Spray the inside with cone spray. 4 Place the large end of the boot over the narrow end of the cone. Place the large end of the cone over the joint. 5 Push the boot forcefully until it is lear of the cone. 6 Remove the cone and turn the boot right side out - if necessary. 7 Snip the corner of the grease sachet and fill the joint. Slide and stretch the boot into position over the joint. 8 Secure the boot with fixing clips, removing any excess with tin snips. Replace the hub and road wheel.
General Information
universal gaiter kit
Inner diameter 2 | 90 mm |
Inner diameter 1 | 22 mm |
Height | 120 mm |
Placement on Vehicle | Wheel Side |
Function | Bellow, drive shaft |
Reinforced Version | |
Extra Description | Duraboot |
Type | Bellow, drive shaft |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023