Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 33 of 36
Results 961 - 990 of 1079
Part number: JSC130MSP
Important compatibility info
| Title | Superclamp M/S 122-130mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Single nut adjustment
- Smooth band protects hose
- Bridge piece ensures 360 deg seal
- Solid trunion maximises torque
- Assembly by manual or automatic tools
- Chromium VI free finish on all materials
- Mild steel zinc plated
ONLY
£13.58
£13.58
Part number: M00MS
Important compatibility info
| Title | Hose Clips M/S M00 11-16mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- The original worm drive hose clip
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- Mild steel zinc protected
ONLY
£10.65
£10.65
Part number: MB1707
Important compatibility info
| Title | 11mm Multiband Pocket Pack - Mild Steel |
Additional Information
- Convenient small sized pack, quick to use and versatile
- Suitable for sign fixings, heating ventilation and air conditioning (HVAC) fastening applications
- Pack contains 3m of 11mm width Mild Steel Zinc protected banding and 8 x Mild Steel Zinc protected solid housings and screws
- Features: Self assembly, endless banding or screw band system, cut band to desired length
- 7mm width band, 0.82mm band thickness, recommended torque 3.4Nm, 7mm A/F hexagonal head screw
ONLY
£28.79
£28.79
Part number: NB0709
Important compatibility info
| Title | Junior Clips M/S 7-9mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£21.44
£21.44
Part number: NB0810
Important compatibility info
| Title | Junior Clips M/S 8-10mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£21.73
£21.73
Part number: NB0911
Important compatibility info
| Title | Junior Clips M/S 9-11mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£21.12
£21.12
Part number: NB1012
Important compatibility info
| Title | Junior Clips M/S 10-12mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£21.12
£21.12
Part number: NB1113
Important compatibility info
| Title | Junior Clips M/S 11-13mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£21.37
£21.37
Part number: NB1214
Important compatibility info
| Title | Junior Clips M/S 12-14mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.60
£22.60
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£24.10
£24.10
Part number: NB1416
Important compatibility info
| Title | Junior Clips M/S 14-16mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.49
£22.49
Part number: NB1618
Important compatibility info
| Title | Junior Clips M/S 16-18mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£22.70
£22.70
Part number: NB1820
Important compatibility info
| Title | Junior Clips M/S 18-20mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mini clips, also known as nut & bolt clips
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Used in applications such as securing fuel lines and heater hoses
- 7mm A/F screw fastening
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
ONLY
£27.75
£27.75
Part number: OK175MS
Important compatibility info
| Title | O Clip Kit M/S - Pack of 175 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. Jubilee 'O' Clips are two ear clamps widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, they are also suitable for low pressure hydraulic applications. Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions. Pincers are used to crimp the ears of the clamps and affect a proper seal. A 'O' clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 175 'O' clips in a re-usable plastic container
- Mild steel zinc plated
ONLY
£70.58
£70.58
Part number: PPMS
Important compatibility info
| Title | Assorted M/S Hose Clips - Box of 32 |
Additional Information
- Convenient small pack
- Contains 32 assorted Jubilee Clips
- Covers recommended adjustment ranges from 9.5mm to 40mm
- Conform to British Standard BS5315
- Pack dimensions H 39mm x L 180mm x W 150mm
ONLY
£32.53
£32.53
Part number: 83405
Important compatibility info
| Title | R Clips - 5mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 5mm diameter
- Length 110mm
ONLY
£5.42
£5.42
Part number: AA7102
Important compatibility info
| Title | XF-Euro Adaptor Male Thread R 1/4 |
Additional Information
This range of XF Adaptors offer excellent flow characteristics providing the workshop with increased airflow when required and enhanced tool efficiency. The XF Adaptors, commonly referred to as Euro adaptors, are designed and manufactured in Sheffield by PCL.
- High flow rate of 130 cfm @ 100 psi
- Hardened steel construction with corrosive resistant finish
- Steel shoulder helps prevent accidental disconnection
- Enhances tool efficiency
- Thread size: R 1/4
- Thread type: Male
- Nominal Bore (mm): 7.4
- Flow Rate: 2200 l/min @ 6 bar supply
- Maximum Working Pressure: 35 bar / 508 psi
ONLY
£6.09
£6.09
Part number: AC21CF
Important compatibility info
Additional Information
The Airflow Coupling is the original quick release in.PCLin. with around 75 years of design enhancement. This product, along with the Standard Adaptor, is still manufactured in the UK to the highest possible standards, with the in.Made in Sheffieldin. Airflow series now a benchmark in the UK for quality and reliability. Suitable for most compressed air applications - particularly fixed applications where the coupling is used over a workbench and a single action is preferred.
- Single action
- Steel construction
- Corrosive resistant finish
- Benchmark in the UK for quality and reliability
- Designed for fixed applications
- Thread size: Rp 1/4
- Thread Type: Female
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£10.66
£10.66
Part number: AC21CM
Important compatibility info
Additional Information
The Airflow Coupling is the original quick release in.PCLin. with around 75 years of design enhancement. This product, along with the Standard Adaptor, is still manufactured in the UK to the highest possible standards, with the in.Made in Sheffieldin. Airflow series now a benchmark in the UK for quality and reliability. Suitable for most compressed air applications - particularly fixed applications where the coupling is used over a workbench and a single action is preferred.
- Single action
- Steel construction
- Corrosive resistant finish
- Benchmark in the UK for quality and reliability
- Designed for fixed applications
- Thread size: R 1/4
- Thread Type: Male
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£10.35
£10.35
Part number: AC21JM
Important compatibility info
Additional Information
The Airflow Coupling is the original quick release in.PCLin. with around 75 years of design enhancement. This product, along with the Standard Adaptor, is still manufactured in the UK to the highest possible standards, with the in.Made in Sheffieldin. Airflow series now a benchmark in the UK for quality and reliability. Suitable for most compressed air applications - particularly fixed applications where the coupling is used over a workbench and a single action is preferred.
- Single action
- Steel construction
- Corrosive resistant finish
- Benchmark in the UK for quality and reliability
- Designed for fixed applications
- Thread size: R 1/2
- Thread Type: Male
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£11.74
£11.74
Part number: AC5JF
Important compatibility info
Additional Information
Designed and manufactured in Sheffield by PCL this traditional PCL 100 Series Coupling range offers greater airflow characteristics. These 100 Series Couplings are ideal for the larger air tool applications in garage and tyre shop environments. Sleeve is marked in.M100 Coupling - Series 326in. and in.Patent No 995589in..
- Hardened shoulder helps prevent accidental disconnection
- Specially designed valves and large aperture adaptors provide increased airflow for heavy duty applications
- Swivel feature prevents kinking of the hose
- Thread size: Rp 1/2
- Thread type: Female
- Nominal Bore (mm): 10.3
- Flow Rate: 117 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£29.12
£29.12
Part number: AC6103
Important compatibility info
| Title | Airflow Twin Coupling to Standard Adaptor |
Additional Information
Twin Couplings are a quick and easy solution to providing two operation points from a single air line. PCL Twin Couplings are available with either Vertex or Airflow couplings. PCL Airflow couplings are designed for FIXED applications. PCL Vertex couplings are designed for TRAILING HOSE applications.
- Single action
- Steel construction
- Corrosive resistant finish
- Benchmark in the UK for quality and reliability
- Designed for fixed applications
- Thread size: Rp 1/4
- Thread Type: Female
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£24.80
£24.80
Part number: AC71CM
Important compatibility info
Additional Information
The XF Couplings offer excellent flow characteristics providing the workshop with increased airflow when required and enhanced tool efficiency. XF Couplings, commonly referred to as Euro couplings, are designed and manufactured in Sheffield by PCL.
- High flow rate of 130 cfm @ 100 psi
- Hardened steel construction with corrosive resistant finish
- Steel shoulder helps prevent accidental disconnection
- Enhances tool efficiency
- Maximum Working Pressure: 35 bar / 508 psi
- Flow Rate: 2200 l/min @ 6 bar supply
- Nominal Bore (mm): 7.4
- Thread type: Male
- Thread size: R 1/4
ONLY
£13.76
£13.76
Part number: AC71JM
Important compatibility info
Additional Information
The XF Couplings offer excellent flow characteristics providing the workshop with increased airflow when required and enhanced tool efficiency. XF Couplings, commonly referred to as Euro couplings, are designed and manufactured in Sheffield by PCL.
- High flow rate of 130 cfm @ 100 psi
- Hardened steel construction with corrosive resistant finish
- Steel shoulder helps prevent accidental disconnection
- Enhances tool efficiency
- Thread size: R 1/2
- Thread type: Male
- Nominal Bore (mm): 7.4
- Flow Rate: 2200 l/min @ 6 bar supply
- Maximum Working Pressure: 35 bar / 508 psi
ONLY
£15.29
£15.29
Part number: AC91CM
Important compatibility info
Additional Information
Designed and manufactured in Sheffield by PCL, these quick release Vertex Couplings feature a double action mechanism. This makes them ideal in garages and tyreshops, where operators are using air tools or hand held inflators for trailing hose applications.
- Double action
- Protective shoulder helps to prevent dirt penetration
- Steel construction
- Corrosive resistant finish
- Ideal for use in the garage and tyreshop environments
- Designed for trailing hose applications
- Thread size: R 1/4
- Thread type: Male
- Nominal bore: 4.8 mm
- Flow rate: 43 cfm @ 100 psi
- Maximum working pressure: 14 bar / 200 psi
- Temperature range: -40°C to 100°C
ONLY
£10.23
£10.23
Part number: ACA2488
Important compatibility info
| Title | Standard Adaptor 9.5mm (3/8) i/d Hose Tailpiece |
Additional Information
The PCL Standard Air Line Adaptor is suitable for most compressed air applications. Designed and manufactured alongside PCL couplings, this range of Standard Adaptors has become the benchmark in the UK for quality and reliability. Designed for use with Airflow and Vertex Couplings.
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex and Safeflow Safety Couplings
- Thread size: 9.5mm (3/8)
- Thread type: Hose Tailpiece
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£5.19
£5.19
Part number: ACA3035
Important compatibility info
Additional Information
Designed and manufactured in Sheffield by PCL this traditional PCL 100 Series Adaptor range offers greater airflow characteristics. These 100 Series adaptors are ideal for the larger air tool applications in garage and tyre shop environments.
- Hardened shoulder helps prevent accidental disconnection
- Specially designed valves and large aperture adaptors provide increased airflow for heavy duty applications
- Swivel feature prevents kinking of the hose
- Maximum Working Pressure: 14 bar / 200 psi
- Flow Rate: 117 cfm @ 100 psi
- Nominal Bore (mm): 10.3
- Thread type: Male
- Thread size: R 1/2
ONLY
£8.72
£8.72
Part number: ACKIT01
Important compatibility info
Additional Information
The Emergency Coupling Kit is designed for the service engineer or to keep in a workshop in case of a pneumatic airline failure. This small, compact Emergency Coupling Kit contains all the parts you would need to repair any standard airline failure and have it up and running in minutes.
- Includes genuine PCL couplings, adaptors, hosetails and hose connectors
- Jubilee® Clips and PTFE tape to convert or repair an airline connection
- Ideal to keep in a van or workshop
- Solid compact pocket case with item numbers and descriptions on the inside to aid with replenishments
- Kit contains; x1 AC91CM, x2 ACA2746, x1 HC5656, x1 HC6560, x1 AC91CF, x1 HC6892, x1 HC1217, x1 HC6895, x2 ACA2593, x1 HC6893, x1 HC2479, x1 HC6896, x1 PTFE Tape, x2 OO Jubilee Clip, x2 OOO Jubilee Clip
ONLY
£48.80
£48.80
Part number: HC1206
Important compatibility info
| Title | Hose Tail 7.9mm (5/16) i/d Hose to Male Thread R 1/4 |
Additional Information
This corrosive-resistant, plated Hose Tail Adaptor connects the hose to a female fitting.
- Corrosive-resistant
- Connects the hose to a female fitting
- Hose Internal Diameter: 7.9mm (5/16 in)
- Male Thread: R 1/4
ONLY
£4.59
£4.59
Part number: PCP678
Important compatibility info
| Title | Rubber Lined P Clips - 6mm - Pack of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems.
As part of their automotive spares and accessories range Pearl supply a range of replacement/spare pipe clips suitable for automotive use. These clips come as a pack of 10 and are able to hold and secure pipes of 6mm. It has a rubber inner lining to protect the pipes.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare pipe clips suitable for automotive use. These clips come as a pack of 10 and are able to hold and secure pipes of 6mm. It has a rubber inner lining to protect the pipes. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pipe clips with a fixing hole which is rubber lined to protect damage to any pipe
- Rubber lined
- Protects damaged to any pipe
ONLY
£10.41
£10.41
Page 33 of 36
Hose & Pipe
