Workshop Tools

• Socket set features mirror polish Chrome-Plated finish for rust resistance
• 6 Points
• Shallow Metric Socket Set
• Socket Size 10 mm,11 mm,12 mm,13 mm,14 mm,15 mm,16 mm,17 mm,18 mm,19 mm,20 mm,21 mm,22 mm,23 mm,24 mm

• Large, clear, easy to read LCD display with backlight
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Easy and cost effective to use
• Low and simple maintenance
• Suitable for all applications including tyreshop environments
• Powered by PCL inflation technology and experience
• psi, bar kpa units of pressure selectable by button; last selection saved
• Long battery life with battery level indicator
• Backlight
• Auto power off
• Hand trigger inflate and thumb controlled deflate
• Solid and robust construction

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Torque accuracy CW: +/- 3%, comfort grip handle
• 32 teeth fixed head w/o quick release
• Length: 14 11/16in. overall

• Includes Quick-Adjust-Dividers for custom storage layouts.
• Modular connectivity with PACKOUT™ components: stack on and store in other PACKOUT™ Tool Boxes.
• 11 kg weight capacity.
• Fits inside of: PACKOUT™ Large Box, PACKOUT™ Trolley Box, PACKOUT™ XL Tool Box, PACKOUT™ Rolling Tool Chest.
• Top carry handle allows easy transport.
• Part of the PACKOUT™ modular storage system.
• Flexible additional organisation.

• Full polish chrome finish on each wrench resists corrosion while maintaining the look and feel of a new product.
• Features a non-slip ratchet end and non-slip open end
• The 90 tooth count gear allows 4 degree arc swing
• 12 Point
• 8-19mm set

• 22 kg wall mounted weight capacity.
• 4 5kg floor mounted weight capacity.
• Impact resistant polymer construction.
• Multiple mounting configurations.
• Turn the PACKOUT™ into a stationary storage.
• Connects to all Milwaukee PACKOUT™ modular storage.

• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Not for use on or near live electrical circuits.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• This compression tester kit comes complete with a large, easy to read 2 1/2in. dial face with accurate Bourdon tube meter movement.
• Dual calibrated and colour coded scales read 0-300PSI or 0-2100 k.Pa. and side release valve.
• For petrol engines only
• Dual 14 /18mm adaptozr is fitted to the hose for quick and easy testing of most modern engines
• Additional 10, 12, 14mm long reach adaptors are included

• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Not for use on or near live electrical circuits.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Flexible material allows for easy install and removal.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.

• 90 tooth design with 4 °of arc swing for tight work spaces.
• Slim profile head with flush direction lever offers better accessibility.

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D
• This kit includes the latest crankshaft timing pin
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• The high pressure fuel pump does not require timing
• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts

General Information

Diesel Injector Puller

• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors
• Presented in a handy blow mould case
• Incorporating a slide hammer
• Saves time and money when injectors are difficult to remove

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears
• Full Engine rebuild kit available part number 4773
• Made in Sheffield

• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Fit & Remove TPMS Components With Ease
• Includes Product Identification & Help Guide
• Plastic Carry Case With Foam Inlay

• M18™ LED electronics deliver 2x longer run time on a single charge with less heat than conventional removable light bulbs
• Integrated hook for hands-free use
• The 120 lumen LED light is 2x brighter and whiter than conventional incandescent bulbs
• Sealed aluminium head is designed for impact- and weather-resistant durability
• 135° rotating head allows the user to easily direct the light beam at the desired work area
• Flexible battery system: works with all MILWAUKEE® M18™ batteries

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Best fitting thanks to 6 gripping points.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.

• Powerful three LED design provides 220 lumens
• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• TRUEVIEW™ high definition lighting
• Adjustable metal hook allows for light to be hung in multiple orientations when being used
• Compact design - operates in locations other lights cannot

• This optical refractometer is designed for checking the concentration of Adblue - a urea additive in the exhaust flow which reduces NOx-emissions
• For HGVs and Light Commercials
• Includes refractometer - precision screwdriver and dropper
• A refractometer can check these additives with just a small amount of fluid

• Mirror polished Chrome plated finish

• Optimized head geometry for secure grip on fasteners to reduce rounding of nuts.
• I-beam handle for more comfort while applying high torque.
• Ink-filled size labels for easy and quick size identification.
• 15°angled heads for better access.
• Durable storage tray.

• A comprehensive, yet simple to use kit, suitable for cutting and flaring copper, brass and thin walled aluminium tubing
• Produces male and female flares
• Cuts tube from 3mm dia to 30mm and pipe 5mm to 16mm
• Produces high quality 45 Flares

• Glass sight gauge
• 300mm hose, 1/4in.
• NPT 150mm twin clip-on connector manufactured from chrome-plated steel

• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting
• Thanks to its compact design it operates in locations other lights cannot
• TRUEVIEW™ high definition lighting
• Pivoting 45° forward & backward head allows for 180° coverage
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Protected against splashing water at all angles (IP24)

• According to DIN 8033.
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Includes: Types B ,C ,D, H, M.
• Type C: Cylindrical ball nose for top and side cutting.
• Type D: Ball for milling holes and creating concave cuts.
• Type H: Flame for contouring.
• Type M: Cone for angled edges and narrow contours.

General Information

Engine Timing Tool Kit - for VAG 3cyl 4v

• Application: 3 cylinder VAG engine currently found in the Volkswagen UP! engine code CHYA,CHYB
• Plus Seat Mii and Skoda Citigo
• Also for Blue Motion and Ecomotive plus Green Tech engines
• Camshaft belt tensioner wrench available - Part No. 6199 (OEM T10499)
• Made in Sheffield. Camshaft Locking Bar (C667) is EU Registered Design