Proud to be a UK-based company
Contact usGeneric Lighting
Categories
Important compatibility info
£20.31
Important compatibility info
£20.45
Important compatibility info
£20.59
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 111 mm |
| Height | 21 mm |
| Width | 51 mm |
| Additional Information | without holder |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Screw Connection, mounting |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | Yellow |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| LED Colour | Yellow |
| Type | Side Marker Light |
| Fulfils ECE norm | R91, R3 |
| Function | Side Marker Light |
£20.63
Important compatibility info
£20.64
Important compatibility info
£20.64
Important compatibility info
£20.69
Important compatibility info
£20.75
Important compatibility info
£20.82
Important compatibility info
£21.07
Important compatibility info
£21.07
Important compatibility info
£21.07
Important compatibility info
£21.07
Important compatibility info
£21.07
Important compatibility info
£21.10
Important compatibility info
£21.10
Important compatibility info
£21.13
Important compatibility info
| Weight | 0.39 kg |
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 109 mm |
| Rated Power | 15 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 39 mm |
| Voltage from | 10 V |
| Light Distribution | Long-range illumination |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R10, R23 |
| Lumen | 1200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Additional Information 2 | with fastening material |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
£21.23
Important compatibility info
£21.24
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 104 mm |
| Height | 34 mm |
| Width | 54 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | Glued, mounting |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | Yellow |
| Fastening Type | for horizontal fastening |
| Power Consumption | 1.0 W |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 4 |
| LED Colour | Yellow |
| Type | Side Marker Light |
| Fulfils ECE norm | R3 |
| Function | Side Marker Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Brief Information
*** Original spare part
£21.33
Important compatibility info
| Placement on Vehicle | Front, Right, Left |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 300 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7, R3 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.42
