Engine Oils

Carlube Triple R 5W-50 R-Tec 29 fully synthetic motor oil is suited for a broad range of applications including motorsport, classic/collector cars and extreme driving conditions like towing and high operating temperatures.

Optimum engine performance and improved fuel economy
Exceptional all year round protection from cold start to high-temperature driving

• Exceptional fuel saving benefits
• Compatible with after-treatment devices
• Low oil consumption
• Extended oil drain capabilities

• ACEA E4, E6, E7, E9, API CK-4, MERCEDES BENZ MB 228.52, MB 228.51, MB 228.31, CUMMINS CES 20086, MAN M3777, M3677, CATERPILLAR ECF-3, VOLVO VDS-4.5, RENAULT TRUCKS RLD-4, RLD-3, IVECO 18-1804 TLS E6, SCANIA LDF-4 LA

• Recommended for use in pre-2009 Ford engines
• Blended with high quality synthetic and mineral base materials
• Suitable for a wide range of vehicles
• Provides ultimate engine protection for all driving conditions

• ACEA A1/B1, API SL/CF, FORD WSS-M2C913-B & A, BMW LONGLIFE-01 FE

• Primarily designed for Vauxhall vehicles requiring Dexos 2 specification
• Provides protection for diesel particulate filters and catalytic converters
• Provides high performance with fuel efficiency
• Exceptional long term additive response

• ACEA C3, API SN/CF, GM dexos2™, MB 229.52, 229.51, 229.31, 226.5, BMW LONGLIFE-04, VW 502.00/505.01, RENAULT RN0700, RN0710

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Keeps engine extremely clean by minimizing deposits

• Approved: Jaguar Land Rover STJLR 03.5005 Meets: ACEA C1 and C2
• Recommended for in-warranty service fill where Ford WSSM2C934-B is required, Meets requirements of Land Rover, Jaguar, Mitsubishi *Check owner’s manual before use

Carlube Triple R 0W-20 R-Tec 4 has been formulated to meet API SN and ILSAC GF-5 specifications. An oil meeting these demanding specifications must demonstrate a range of performance parameters.

Triple R 0W-20 R-Tec 4 delivers excellent performance in both engine protection and cleanliness.
It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel-efficiency and ethanol fuel compatibility.

• An ideal choice for use in many Peugeot and Citroen vehicles
• Provides protection for diesel particulate filters and catalytic converters
• Provides high performance with exceptional fuel economy
• Exceptional long term engine protection

• ACEA C2, API SN/CF, PSA B71 2290, RENAULT RN0700, FIAT 9.55535-S1

• Provides protection for diesel particulate filters and catalytic converters
• Designed specifically for the latest Peugeot & Citroen engines
• Exceptional long term additive response
• Combines high performance with fuel efficiency

• ACEA C2, PSA B71 2312

Carlube Triple R 5W-30 A3/B4 is a fully synthetic passenger car extended drain engine oil, specially formulated for the latest petrol and diesel engines with flexible oil drain intervals.

Triple R 5W-30 R-Tec 16 has achieved accreditation through the successful completion of several testing programs including industry-wide performance levels such as API SL and ACEA A3/B4 and OEM approvals such as Daimler MB 229.3 and Renault RN0700/710.
Such diverse accreditation ensures that Carlube Triple R 5W-30 R-Tec 16 provides strong lubricant performance immediately from low temperatures up to the warmest climatic conditions. Helps to extend engine life

Carlube Triple R 5W-20 R-Tec 14 meets the Ford M2C948-B specification, which is primarily designed for the 1.0 liter, three-cylinder EcoBoost engine, and also offers backward compatibility.

Engine oils that meet this specification must provide a 0.9% fuel economy improvement over regular 5W-20 oils during testing.
Triple R 5W-20 R-Tec 14 reduces internal friction within the engine in order to deliver full power, while at the same time generating fuel savings.
As a lighter viscosity engine oil, Carlube Triple R 5W-20 R-Tec 14 provides faster flow to engine parts even at low temperatures due to its extreme fluidity. This will result in reduced metal-to-metal contact and continuous oil flow around the engine.

Carlube Triple R 10w40 Semi Synthetic Oil has been specially developed to meet the exacting requirements of Europe's leading vehicle engine manufacturers.

Optimum engine performance, with reduced friction and wear. Improved fuel economy and reduced exhaust emissions. Exceptional all year round protection from cold start to high temperature driving.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 10W-40 A/B is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP 10W-40 lubricant. Castrol MAGNATEC 10W-40 A/B is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Product Performance Claims

• ACEA A3/B4
• API SP
• Meets - Fiat 9.55535-D2
• MB-Approval 229.3
• VW 501 01/ 505 00

• Castrol MAGNATEC. Non-stop protection from every start.
• Deliver protection designed specifically for modern driving
• DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect..

• ACEA A3/B4, API SP
• MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2

• Significantly reduces low speed pre-Ignition
• Reduces sludge and improves engine cleanliness
• Provides high performance with fuel efficiency
• Reduces turbocharger deposits

• API SP, SP-RC, SN PLUS, SN, GM dexos1™ Gen 2, ILSAC GF-5

• Cost effective
• Optimised level of detergency
• Excellent anti-wear properties

• API CC/SE, CCMC D1, MIL-L-2104B, MIL-L-46152B

Fully synthetic engine oil manufactured to give maximum performance with unrivalled protection from cold start to high temperature driving.

Carlube Triple R 5w30 Fully Synthetic is a longlife motor oil suitable for the latest generation of petrol and diesel engines, on fixed and variable service intervals, and requiring a low SAPS/Low ash engine oil.

Optimum engine performance and improved fuel economy. Reduced exhaust emissions and reduced friction and wear. Exceptional all year round protection from cold start to high temperature driving.

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Keeps engine extremely clean by minimizing deposits. Provides ultimate protection against wear under all operating conditions
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition

• Approved: BMW LL-12 FE Meets: ACEA C2

• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced soot control to prevent premature oil degradation
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C2, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade.
• Low Speed pre-ignition protection incorporated

• Meets: ACEA: C5
• API: SN, SP

• After treatment system compatible
• Extended drain intervals
• Excellent high and low temperature stability

• ACEA C2, C3, API SN/CF

• A highly versatile low SAPS engine oil for ACEA C3 applications
• Suitable for VW, Audi, GM, BMW, Mercedes, Seat, Skoda, and certain Peugeot & Citroen models
• Covers Longlife III applications
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C3, API SN, VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30

• Primarily designed for GM Vauxhall (non DPF)
• Suitable for a wide range of vehicles
• Allows for extended drain capability
• Not to be used in vehicles with diesel particulate filters

• ACEA A3/B4, API SM/CF, VW 502.00/505.00, MB 229.5, GM LL-A-025, LL-B-025, BMW LONGLIFE-01, LONGLIFE-98

• A highly advanced low SAPS engine oil
• Suitable for VW PD engines, GM dexos2, modern and certain Fiat & Ford KA models
• Provides high performance with fuel efficiency
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C3, API SN/CF
• BMW LONGLIFE-04, GM Dexos 2, MB-229.51, MB-229.31, FIAT 9.55535-S2, FORD WSS-M2C917-A, Porsche A40, RENAULT RN0700, RN0710

• Excellent high temperature stability
• Suitable for a wide range of vehicles
• Provides ultimate engine protection for all driving conditions
• Not to be used in vehicles with diesel particulate filters

• ACEA A3/B3, A3/B4, API SN/CF, VW 502.00, 505.00, 501.01, MB 229.5, 229.3, GM LL-B-025, BMW LL-01, PSA B71 2296, RENAULT RN0700, RN0710, PORSCHE A40

• Fuel saving technology
• Compatibility with after treatment systems
• Fully synthetic, long drain formulation
• Very high standards of engine cleanliness

• BMW LONGLIFE-12 FE

Carlube 2-Stroke Motorcycle Oil is formulated to cope with high revving and higher operating temperatures experienced with motorcycle engines. These oils are suitable for small engine scooters to large V twin engines, sports and racing motorcycles.

• Low speed pre-ignition prevention
• Excellent fuel efficiency
• Ensures consistent lubricant performance over extended drain intervals
• Compatible with petrol particulate filters

• ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A, BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

• Outstanding thermal properties
• Compatible with after-treatment systems
• Excellent anti-wear characteristics
• Prevention of sludge and varnish formation

• ACEA C3, VW 504:00/507:00, BMW LL-04, PORSCHE C30

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test

• Approved: PSA B71 2290-2017 Meets: ACEA C2, A1/B1, A5/B5, API: SM, SN/CF
• Renault RN0700. Meets requirements of: Honda*, Toyota*. Recommended for use where Fiat 9.55535.S1 is specified. *Check owners’manual before use

• OEM approved premium grade motor oil
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• Formulated for excellent product stability. Long lasting performance and suitable for long drain intervals
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition

• Approved: Renault RN0720 Meets: ACEA C4
• MB 229.51, Meets requirements of some models of Nissan* and Suzuki*.