Proud to be a UK-based company
Contact usBattery Chargers
invoice Page 5 of 6
Results 121 - 150 of 153
Part number: RSC804
Important compatibility info
| Charge Rate | 4 A |
| 12V Charge Capacity (up to) | 1 Ah - 90 Ah |
| Charging Voltage | 6/12 V |
| Trickle Charge | Maintains |
| Title | Multi-Stage Fully Automatic Smart Charger |
| 6V Charge Capacity (up to) | 1 Ah - 40 Ah |
Additional Information
The Ring RSC804 is a 4A smart charger and battery maintainer suitable for 6V and 12V vehicles and recommended for START/STOP batteries. Compatible with lead acid, gel, calcium, EFB and AGM batteries. Keeps batteries in good condition without risk of overcharging. One button operation and large LCD backlit display for ease of use as well as reverse polarity and short-circuit protection for safety. Connect and be sure with the charger adjusting automatically to long-term maintenance mode when the vehicle's battery is full.
Available with three pin plug (part number RSC804) and two pin plug (part number RESC804)
- Smart charger and battery maintainer
- Stop/Start compatible
- 7-Stage charging process
- Large LCD display screen that clearly shows voltage and charging process
- Cold weather charging mode that protects batteries in cold temperatures
- Quick connectors with clamps or O-ring terminals for long term connection
- One button operation for ease-of-use
- Backlit display can be seen in low light
- Reverse polarity and short-circuit protection
- Connect and be sure - automatically adjusts to long-term maintenance mode when battery is full
ONLY
£30.42
£30.42
Part number: AC1201T
Important compatibility info
| Charging Voltage | 12 V |
| Other Part Number | 12V 1A |
| Charge Rate | 1 A |
| Trickle Charge | 1 Ah - 100 Ah |
ONLY
£29.62
£29.62
Part number: REVA100
Important compatibility info
| Title | Cable Ramp Anti-trip and heavy duty protection |
Additional Information
Protect your charging cable from wear and tear or damage with the Ring Cable Ramp. Has two channels for running cables through and can be driven over without damaging the cables inside. Ideal when more than one car uses a driveway or have to charge your cable out to a vehicle parked on the roadside. Also acts as an anti-trip device for pedestrians.
- Solid tough construction that can withstand 2 tons of weight, protecting the cables inside
- Hinged top panel allows easy access to run two cables through the ramp
- Anti-slip top cover so pedestrians don’t fall or slip when walking over it
- Interlocking design to create a chain or run to cover the full length of the cable being used
- Bright yellow colour so other road users can see it clearly
ONLY
£29.54
£29.54
Part number: 501700M
Important compatibility info
| Charge Rate | 0.5 A |
| Trickle Charge | No |
| Charging Voltage | 6/12 V |
| 6V Charge Capacity (up to) | 2 Ah - 20 Ah |
| 12V Charge Capacity (up to) | 2 Ah - 20 Ah |
| Other Part Number | 6V 1A |
ONLY
£28.04
£28.04
Part number: MP7106
Important compatibility info
| Title | Battery Charger 6A - 12V - LED Automatic |
| Charging Voltage | 12 V |
| Weight | 2200 |
| 12V Charge Capacity (up to) | 20 Ah - 80 Ah |
| Charge Rate | 6 A |
| Trickle Charge | 20 Ah - 80 Ah |
Additional Information
- Suitable for lead acid & AGM batteries up to 1.8lt
- Fully automatic - easy to use and safe
- Suitable for Start/Stop vehicles
- LED indicators showing charging progress
- Compact robust case with integral handle
- Overcharge, short & reverse polarity protection
- 1.7m leads with inline fuse protection and fully insulated crocodile clips
- Manufactured to European electrical safety standards
- Suitable for low maintenance and maintenance free 12V lead acid & AGM batteries of 20Ah to 100Ah capacity only
- Input: 230V AC 50Hz
- Output: 12V DC 4.0A (EN Rated) 6A Max
ONLY
£27.76
£27.76
Part number: MP7403
Important compatibility info
| 12V Charge Capacity (up to) | 1.2 Ah - 120 Ah |
| Title | Smart Battery Maintenance Charger - 1.5A - 6/12V |
| 6V Charge Capacity (up to) | 1.2 Ah - 120 Ah |
| Weight | 400 |
| Charge Rate | 1.5 A |
| Charging Voltage | 6/12 V |
| Trickle Charge | 1.2 Ah - 120 Ah |
Additional Information
- Automatic 9 stage charging cycle including diagnosis; charging and reconditioning
- Ideal maintenance charger
- Suitable for Start/Stop vehicles
- 1.5m leads with interchangeable insulated crocodile clips and ring terminals
- LED indicators showing charging status
- Overheat, Overcurrent & Overcharge protection
- Modern packaging design
- Max output 1.5A
- IP65
- Voltage 6/12V
- Battery capacity 1.2Ah - 120Ah (lead acid and AGM)
ONLY
£27.76
£27.76
Part number: MP7404
Important compatibility info
| Weight | 1200 |
| 12V Charge Capacity (up to) | 10 Ah - 60 Ah |
| Charging Voltage | 12 V |
| Charge Rate | 4 A |
| Trickle Charge | No |
| Title | Compact Battery Charger - 4A - 12V |
Additional Information
Suitable for 12V lead acid & AGM batteries up to 1.2LT fully Automatic - easy to use and safe built in safety features - overload, reverse polarity & short circuit protection 1.4M leads with insulated crocodiles clips compact robust ABS case with integral handle & fully insulated crocodile clips led indicators showing charging status handy cable tidy for compact storage easy and safe to use suitable for start/stop vehicles output (amps) - 4A battery output capacity - 10-60ah suitable for: golf trolleys, lawn mowers, scooters, motorcycles, cars and caravans
- Compact robust case with integral handle
- Fully Insulated Crocodile Clips
- Suitable for Start/Stop vehicles
- Handy Cable Tie for compact storage
- LED indicators showing charging status
- Suitable for 12V applications
- Suitable for 12V lead acid & AGM batteries of 10Ah to 60Ah capacity only
- Output 4A
ONLY
£26.48
£26.48
Part number: MP7104
Important compatibility info
| Title | Battery Charger - 4A - 12V - LED Automatic |
Additional Information
- Suitable for lead acid & AGM batteries up to 1.8lt
- Fully automatic - easy to use and safe
- Suitable for Start/Stop vehicles
- LED indicators showing charging progress
- Compact robust case with integral handle
- Overcharge, short & reverse polarity protection
- 1.7m leads with inline fuse protection and fully insulated crocodile clips
- Manufactured to European electrical safety standards
- Suitable for low maintenance and maintenance free 12V lead acid & AGM batteries of 20Ah to 100Ah capacity only
- Input: 230V AC 50Hz
- Output: 12V DC 2.6A (EN Rated) 4A Max
ONLY
£25.69
£25.69
Part number: B121
Important compatibility info
| Other Part Number | 12V 1A |
| Length | 135 mm |
| Height | 40 mm |
| Width | 50 mm |
| Charging Voltage | 12 V |
| Trickle Charge | 1 Ah - 120 Ah |
| Extra Description | Sterling Portable |
| 12V Charge Capacity (up to) | 1 Ah - 50 Ah |
| Charge Rate | 1 A |
ONLY
£25.18
£25.18
Part number: MP7402
Important compatibility info
| Title | Automatic Trickle Battery Charger - 0.5A - 12V |
| Other Part Number | 12V 1A |
| Charge Rate | 0.5 A |
| Trickle Charge | 1 Ah - 100 Ah |
| Charging Voltage | 12 V |
Additional Information
Many car batteries struggle in the winter and spring time due to cold weather and lack of use. Jump leads are a great way of getting your car going when you have a flat battery, but using them constantly will have a negative effect in the long term as you will be continually discharging the battery. Therefore, maintaining your battery's charge is a far more cost effective way of starting your car with less hassle. Trickle chargers are a great way of maintaining a battery's charge. This Maypole 12V automatic trickle charger is to be used indoors, by simply connecting your car battery to the charger. You can then leave it charging until the next time you need to use it, when you can have confidence in knowing that it will work. Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.
- 12V / 0.5A fully automatic plug-in battery charger ideal for maintenance charging
- Suitable for 12V lead-acid batteries (wet, maintenance-free, AGM & GEL) up to 100Ah only
- Automatic detection of battery voltage and condition and dual colour LED charging status indicator
- 4 step cycle: Diagnosis, bulk, absorption & maintenance charging modes
- Protection against thermal and current overload, reverse-polarity and incorrect connection with spark free crocodile clips
- Manufactured to European electrical safety standards;Input 220-240V AC 50Hz 0.2A;Output 12V DC 0.5A;For indoor use only;Protection class IP20;Max Lead-acid battery capacity 100Ah;Conforms to EN60335-1, EN60335-2-29, EN55014, EN61000, 73/23 CEE, 93/68 CEE,
ONLY
£22.41
£22.41
Part number: RSPOBDN
Important compatibility info
| Title | Ring OBDII Connector For Ring Solar Panels |
| Length | 2000 mm |
| Weight | 154 |
Additional Information
Compatible with Rings RSP500 RSP1000 and RSP2000 Solar Batter Maintainers to allow connection via the vehicles OBDII port, for a more efficient connection rather than through the 12V socket. Provides a permanent link between a solar panel and your battery for long term battery maintenance.
- Compatible with RSP500; RSP1000 and RSP2000 Solar Battery Maintainers
- Connects via OBDII for a more efficient charging connection
- Permanently link between a solar panel and your battery for long term battery maintenance
- 2M in length for easy access to the OBDII port.
- 2A fuse
- UV resistant cable
ONLY
£22.32
£22.32
Part number: 56-304
Important compatibility info
ONLY
£22.13
£22.13
Part number: MP7406
Important compatibility info
| Charging Voltage | 12 V |
| Title | Compact Battery Charger - 6A - 12V |
| Trickle Charge | No |
| Charge Rate | 6 A |
| 12V Charge Capacity (up to) | 12 Ah - 80 Ah |
Additional Information
Suitable for 12V lead acid & AGM batteries up to 1.8LT fully Automatic - easy to use and safe built in safety features - overload, reverse polarity & short circuit protection 1.4M leads with insulated crocodiles clips compact robust ABS case with integral handle & fully insulated crocodile clips led indicators showing charging status handy cable tidy for compact storage easy and safe to use suitable for start/stop vehicles output (amps) - 6A battery output capacity - 12-80ah suitable for: golf trolleys, lawn mowers, scooters, motorcycles, cars and caravans
- Compact robust case with integral handle
- Fully Insulated Crocodile Clips
- Suitable for Start/Stop vehicles
- Handy Cable Tie for compact storage
- LED indicators showing charging status
- Suitable for 12V applications
- Suitable for 12V lead acid & AGM batteries of 12Ah to 80Ah capacity only
- Output 4A
ONLY
£21.71
£21.71
Part number: 56-915
Important compatibility info
ONLY
£20.75
£20.75
Part number: REVA108
Important compatibility info
| Title | Type 1 Wall Hook and Holster |
Additional Information
Keep your charging cables off of the floor and tidy when used at home. The hanging hook allows a 5m cable to be wrapped around the hook keeping the cable from being scratched or dragged on the floor, while the holster prevents dirt or moisture from getting into your Type1 plug connection.
- Holster stops dirt and moisture entering the connector
- Hook keeps the cable off the floor and stores neatly? when used at home
- Secures easily into the wall with 3 screws
- Prevents unnecessary damage to cables keeping them in good working order for longer
ONLY
£19.74
£19.74
Part number: REVA109
Important compatibility info
| Title | Type 2 Wall Hook and Holster |
Additional Information
Keep your charging cables off the floor and tidy when used at home. Hanging hook allows 5m cable to be wrapped around the hook keeping the cable from being scratched or dragged on the floor, while the holster prevents dirt or moisture getting into your Type 2 plug connection.
- Holster stops dirt and moisture entering the connector
- Hook keeps the cable off the floor and stores neatly? when used at home
- Secures easily into the wall with 3 screws
- Prevents unnecessary damage to cables keeping them in good working order for longer
ONLY
£19.74
£19.74
Part number: REVA107
Important compatibility info
| Title | EV Accessory Charging Sign |
Additional Information
Warn other road users that you are charging your EV car, so that they know to avoid cable trip hazards and the fact that high voltage electrical charging is taking place.
- Made from aluminium so the sign is lightweight, but durable
- Easy to install with fixing included for wall or post mounting
- Clearly visible so other road users can see where an EV car is being charged
ONLY
£18.65
£18.65
Part number: 501894M
Important compatibility info
ONLY
£17.61
£17.61
Part number: 56-382
Important compatibility info
ONLY
£16.64
£16.64
Part number: REVA110
Important compatibility info
| Title | Type 1 Wall Holster |
Additional Information
When charging at home, it is important to keep you charging cable in good working order. Prevent dust, dirt and moisture from getting into the Type 1 plug connection.
- Holster stops dirt and moisture entering the connector
- Secures easily into the wall with 4 screws
- Prevents unnecessary damage to cables keeping them in good working order for longer
ONLY
£16.58
£16.58
Part number: REVA111
Important compatibility info
| Title | Type 2 Wall Holster |
Additional Information
When charging at home, it is important to keep you charging cable in good working order. Prevent dust, dirt and moisture from getting into the Type 2 plug connection.
- Holster stops dirt and moisture entering the connector
- Secures easily into the wall with 4 screws
- Prevents unnecessary damage to cables keeping them in good working order for longer
ONLY
£16.58
£16.58
Part number: 56-689
Important compatibility info
ONLY
£16.52
£16.52
Part number: REVA105
Important compatibility info
| Title | EV Portable Charger Storage Bag |
Additional Information
A bag that makes tidying away your cables easy, but also storing neatly in your car. EV cables can weigh a lot so to have them tidied away rather than sloshing about in the boot is practical common sense. All Ring EV Portable Charging Cables come with a storage bag, but you may need a replacement or an extra one.
- Robust construction to protect the cables inside
- Suitable for charging cables upto 5Min length
- Keeps the cables stored neatly in the car
- Prevents dust and dirt from getting into the plug connection
- Velcro strips on the back to fasten to interior wall of the car boot
ONLY
£15.12
£15.12
Part number: REVA104
Important compatibility info
| Title | EV Cables Storage Bag |
Additional Information
A bag that makes tidying away your cables easy, but also storing neatly in your car. EV cables can weigh a lot so to have them tidied away rather than sloshing about in the boot is practical common sense. All Ring EV cables come with a storage bag, but you may need a replacement or an extra one.
- Robust construction to protect the cables inside
- Suitable for charging cables upto 5M in length
- Keeps the cables stored neatly in the car
- Prevents dust and dirt from getting into the plug connection
- Velcro strips on the back to fasten to interior wall of the car boot
ONLY
£13.80
£13.80
Part number: REVA102
Important compatibility info
| Title | Type 2 Replacement Rubber Cover |
Additional Information
Damaged or lost your protective rubber end cap from the charging cables? Replace with spare rubber cap to prevent dust or moisture getting into the charge plug connection when not in use.
- Easy to install on to the cables with quick tie wrap attachments
ONLY
£12.51
£12.51
Part number: REVA112
Important compatibility info
| Title | EV Cable Wall Hook |
Additional Information
Need somewhere to store you EV charging cable at home, but must have easy access for regular use? Then wrap your cable on the dedicated EV cable hook.
- Hook keeps the cable off the floor and stores neatly when used at home
- Secures easily into the wall with 4 screws
- Prevents unnecessary damage to cables keeping them in good working order for longer
ONLY
£11.82
£11.82
Page 5 of 6
Battery Chargers
